Bericht
Since the audio of MAIN and SUB was
mentioned in the DVR thread, a sperate discussion.
The way the audio from MAIN and SUB comes to
your ears has been discussed before, but here's one.
How about this solution.
1. Suppose the audio is in the
balance mode.
Sub-pot in the middle (balance): both
receivers have same volume, MAIN on left ear, SUB on
right
When moving the sub pot more to MAIN,
then the audio of the SUB in right ear decreases AND is filled up by
extra sound of MAIN. So right ear has a mix of SUB and MAIN.
This works vice versa of
course.
In this way, when moving the balance to
left, both ears will hear MAIN, and when moving the balance right, both ears
will hear SUB.
2. Suppose the audio in in nor
mode.
Make this nor 1 and nor 2.
Both nor1 and nor 2 use the seperate
controls as implemented now.
special about nor 1: audio of MAIN and SUB
completely seperated (this is the way the K3 is working now)
special about nor 2: audio of MAIN and SUB
are a bit mixed but MAIN is mainly on left and SUB is mainly on right
(like it is implemented on a FT1000MP)
Donot know if it is easy to implement, but
this is how I would like it.
73
Arie PA3A
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
