Front Panel Changes...

[NK7Z]

Hi,
I have recently been programming Macros...  I noticed that now when in
CW mode, if I press the M1 front panel key, I get the EQ for RX.  

I assume there is some way to reassign the FP keys on a K3...  Where can
I find out abut this.  I would like the M1 key to revert back to CW
memories...

--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Cady, Fred]

Good morning.

Tap REC
Tap M1
Tap REC again and your CW keys should return.
Cheers,
Fred KE7X

"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
"The Elecraft KPA500 and KAT500 - the K-Line Dream Station"
Printed, coil bound copies of these are all available at www.elecraft.com
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of David Cole
Sent: Saturday, July 19, 2014 6:21 AM
To: [hidden email]
Subject: [Elecraft] Front Panel Changes...

Hi,
I have recently been programming Macros...  I noticed that now when in CW mode, if I press the M1 front panel key, I get the EQ for RX.  

I assume there is some way to reassign the FP keys on a K3...  Where can I find out abut this.  I would like the M1 key to revert back to CW memories...

--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[NK7Z]

Hi,
It did, where in your book is this covered?  I want to know why, not
just how to fix... :)  I must have missed it.

--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Sat, 2014-07-19 at 06:36 -0600, Cady, Fred wrote:

> Good morning.
>
> Tap REC
> Tap M1
> Tap REC again and your CW keys should return.
> Cheers,
> Fred KE7X
>
> "The Elecraft K3: Design, Configuration and Operation 2nd ed"
> "The Elecraft KX3 - Going for the summit"
> "The Elecraft KPA500 and KAT500 - the K-Line Dream Station"
> Printed, coil bound copies of these are all available at www.elecraft.com
> KPA500 and KAT500 Quick Set Up Guide
> http://www.ke7x.com/home/k-line-introduction-and-set-up-guide
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of David Cole
> Sent: Saturday, July 19, 2014 6:21 AM
> To: [hidden email]
> Subject: [Elecraft] Front Panel Changes...
>
> Hi,
> I have recently been programming Macros...  I noticed that now when in CW mode, if I press the M1 front panel key, I get the EQ for RX.  
>
> I assume there is some way to reassign the FP keys on a K3...  Where can I find out abut this.  I would like the M1 key to revert back to CW memories...
>
> --
> Thanks and 73's,
> For equipment, and software setups and reviews see:
> www.nk7z.net
> for MixW support see;
> http://groups.yahoo.com/neo/groups/mixw/info
> for Dopplergram information see:
> http://groups.yahoo.com/neo/groups/dopplergram/info
> for MM-SSTV see:
> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Mike K2MK]

Hi David,

Page 21 of the K3 manual. Right column under "Programmable Functions".

You must have accidentally set the M1 button. Been there, done that.

73,
Mike K2MK

David Cole wrote

Hi,
I have recently been programming Macros...  I noticed that now when in
CW mode, if I press the M1 front panel key, I get the EQ for RX.  

I assume there is some way to reassign the FP keys on a K3...  Where can
I find out abut this.  I would like the M1 key to revert back to CW
memories...

Thanks and 73's,

[NK7Z]

Thanks Mike, and thanks for the reference...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Sat, 2014-07-19 at 06:57 -0700, Mike K2MK wrote:

> Hi David,
>
> Page 21 of the K3 manual. Right column under "Programmable Functions".
>
> You must have accidentally set the M1 button. Been there, done that.
>
> 73,
> Mike K2MK
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]