Perish the thought !
I have the power cable to the K3 fused on both leads using automobile-type blade fuse holders wired into Power Pole connectors at both ends. The low power accessories like the P3, PR6-10, remote antenna switch, etc. are individually fused on their positive sides. What I don’t want is to have an accessory develop a problem and take out the main rig when its fuse blows. In accordance with Murphy’s Law that will happen when a P5 is working a pileup and I’m next.
Ted, KN1CBR
------------------------------
Message: 23
Date: Sun, 29 Jan 2017 15:57:42 -0600
From: Tom <
[hidden email]>
To: "
[hidden email]" <
[hidden email]>
Subject: Re: [Elecraft] K3 - stuck at MCU LD we upgrading software
Message-ID:
<
[hidden email]>
Content-Type: text/plain; charset=UTF-8
Are folks hooking their radios directly to the power supply without a fuse
inline? I noted that the Elecraft supplied cable for my K3S did not
include a fuse.
73,
Tom - KQ5S
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
