Fw: K3 CW Dual PB

[Van W1WCG]

Strange, Stewart, that's just the way it sounds, also.  I've listened
with this mode engaged on several occasions now, and I can't really
observe the dual passband effect.  Moreover, the shift control seems
to be disabled, and the width control moves the outer bands but does
not seem to affect the actual passband at all, judging only by listening.
 
Firmware versions MCU 1.78 DSP 1.58
 
 73, Van W1WCG
K3 #42
 

> ----- Original Message -----
> From: "Stewart Baker" <[hidden email]>
> To: "Elecraft Reflector" <[hidden email]>
> Sent: Friday, March 21, 2008 1:17 PM
> Subject: [Elecraft] K3 CW Dual PB
>
>
> Looking with Spectrum Lab on CW with DPB selected all I can see is
> one filter passband. Thought I should see 3, one center and one
> either side. :-(
>
> 73
> Stewart G3RXQ
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Stewart Baker]

I think that it got fixed, then broke in the latest FW release.

73
Stewart G3RXQ
On Fri, 21 Mar 2008 16:32:17 -0400, Van W1WCG wrote:
>
> Strange, Stewart, that's just the way it sounds, also.  I've
listened
> with this mode engaged on several occasions now, and I can't
really
> observe the dual passband effect.  Moreover, the shift control
seems
> to be disabled, and the width control moves the outer bands but
does
> not seem to affect the actual passband at all, judging only by
listening.

>
> Firmware versions MCU 1.78 DSP 1.58
>
> 73, Van W1WCG
> K3 #42
>
>> ----- Original Message -----
>> From: "Stewart Baker" <[hidden email]>
>> To: "Elecraft Reflector" <[hidden email]>
>> Sent: Friday, March 21, 2008 1:17 PM
>> Subject: [Elecraft] K3 CW Dual PB
>>
>>
>> Looking with Spectrum Lab on CW with DPB selected all I can see

is

>> one filter passband. Thought I should see 3, one center and one
>> either side. :-(
>>
>> 73
>> Stewart G3RXQ
>> _______________________________________________
>> Elecraft mailing list
>> Post to: [hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com