Fw: K3 Firmware upload elapsed time

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Fw: K3 Firmware upload elapsed time

Jim Leder


--------------------------------------------------
From: <[hidden email]>
Sent: Monday, December 03, 2012 10:52 AM
To: <[hidden email]>
Subject: Re: [Elecraft] K3 Firmware upload elapsed time

> I had a problem with the load of the firmware. The MCU and DSP loaded
> perfectly with the appropriate messages, but the FPF failed repeatedly
> with rewrite errors. The radio still worked, but the front panel display
> was a mess. Dave at Elecraft soon advised to either send the radio back
> (warranty) or they could send me a replacement FPF board. My eyesight
> isn't so good nor are my hands very steady anymore, so the radio is
> currently in Watsonville.
> Others have suggested to watch the messages for errors on the PC firmware
> load screen. The load should not take more than 5 minutes for all 3 (or
> more if you have a sub receiver). Something is not right, but even when my
> FPF load was failing, it did it in less than 2 minutes.
> BTW, the load failure was variable, sometimes it was real quick and once
> it actually got half way, but never completed. I did update from 4.48 to
> 4.51 sometime ago with success, but I do remember having rewrite errors in
> the FPF section, at least twice before it managed a successful load.
>
> Good luck!
>
> 73 Jim K8CXM ... currently suffering K3 withdrawal
>
> --------------------------------------------------
> From: "Matt Zilmer" <[hidden email]>
> Sent: Monday, December 03, 2012 9:38 AM
> To: "Nand Kishore" <[hidden email]>
> Cc: "elecraft" <[hidden email]>
> Subject: Re: [Elecraft] K3 Firmware upload elapsed time
>
>> Try turning on Advanced Mode in the View menu.  If the link is causing
>> errors, they'll be annunciated on the Send MCU Firmware pane.  You
>> should see the progress bar marking a new block of code every few
>> seconds.
>>
>> 73,
>> matt W6NIA
>>
>> On Mon, 03 Dec 2012 19:32:42 +0530, you wrote:
>>
>>>Handshake between K3 and Comp. via utility is auto set at 38.4K.
>>>That,s what I have seen. I don't get a look in.
>>>
>>>Nandu
>>>______________________________________________________________
>>>Elecraft mailing list
>>>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>Help: http://mailman.qth.net/mmfaq.htm
>>>Post: mailto:[hidden email]
>>>
>>>This list hosted by: http://www.qsl.net
>>>Please help support this email list: http://www.qsl.net/donate.html
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html