Fw: K3 - SSB levels

[Dave, G4AON]

Julian

I've noticed a similar odd issue when using the Winlink program
"Airmail", after quitting the HF module the K3 is returned to it's
original frequency but with the 6 KHz bandwidth filter instead of the
2.8 KHz one... Rather strange as on USB that filter is not enabled.

73 Dave, G4AON
K3/100 #80 MCU f/w 2.02, DSP f/w 1.78
-------------------------------------------------------

Do either of you guys use computer software to control the radio, perchance?
I recently identified a problem where filter settings were not properly
being stored or restored when changing bands by software command. Perhaps
other settings are getting lost or confused as well.

-----
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Julian, G4ILO]

Dave G4AON wrote

Julian

I've noticed a similar odd issue when using the Winlink program
"Airmail", after quitting the HF module the K3 is returned to it's
original frequency but with the 6 KHz bandwidth filter instead of the
2.8 KHz one... Rather strange as on USB that filter is not enabled.

73 Dave, G4AON

That's definitely the issue I identified, which Wayne fixed yesterday.

[Mike Harris-9]

----- Original Message -----
From: "Dave G4AON" <[hidden email]>
To: <[hidden email]>
Sent: Saturday, June 14, 2008 5:10 PM
Subject: [Elecraft] Fw: K3 - SSB levels


| Julian
|
| I've noticed a similar odd issue when using the Winlink program
| "Airmail", after quitting the HF module the K3 is returned to it's
| original frequency but with the 6 KHz bandwidth filter instead of the
| 2.8 KHz one... Rather strange as on USB that filter is not enabled.
|
| 73 Dave, G4AON
| K3/100 #80 MCU f/w 2.02, DSP f/w 1.78
| -------------------------------------------------------
|
| Do either of you guys use computer software to control the radio,
perchance?
| I recently identified a problem where filter settings were not properly
| being stored or restored when changing bands by software command.
Perhaps
| other settings are getting lost or confused as well.
|
| -----
| Julian, G4ILO K3 s/n: 222 K2 s/n: 392

No, I've got a box with knobs and buttons on and I prefer to twist and
push them.  Computer is only used for logging.  The only time I use it to
control the radio is spots and in contests for requested QSYs.

Regards,

Mike VP8NO


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com