Fwd: K3 Equalization Memories - Missing?
Locked
 
|
I was hoping that Equalization Memories will be
available in the future. I'm using headset connected to the front of the radio and studio MIC on the back. With my set up it is not practical to use K3 EQ. Mark --- WB6MND <[hidden email]> wrote: > Date: Sun, 17 Feb 2008 20:19:29 -0800 (PST) > From: WB6MND <[hidden email]> > To: [hidden email] > Subject: [Elecraft] K3 Equalization Memories - > Missing? > > > I'm a new K3 owner and enjoying the unit for all the > reasons already stated > by others. > > But unless I've missed something, there are no > memories for the K3 TX and RX > Equalization settings. Is that correct? > > It would be extremely helplful to have such > memories. > > For example: > > I would like one Rcv Eq setting for weak CW signals, > where I kick up 400 hz > +10 db or so and drop the other eq bands. This > would help me pull the weak > CW sigs out of the noise better. Obviously this > setting would not be used > for SSB or strong CW sigs, where I'd want a flatter > eq curve. > > I'd like one Tx Eq setting for local ragchew work, > maximizing bandwidth and > freq response for best audio quality. Obviously, > this setting would not be > good for DX. For DX, I'd want more punch where the > midrange is kicked up > and the freq extremes are diminished. > > Having several eq memories would allow this > flexibility. As it is, each set > of eq curves for different purposes must be manually > entered. That's > awkward and time consuming. > > If I've missed something and this feature already > exists - great. If it > doesn't, it would be nice to have it. > > Les > WB6MND > Bay Area, California > > -- > View this message in context: > > Sent from the Elecraft mailing list archive at > Nabble.com. > > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
RE: K3 Equalization Memories - Missing?
|
|
It's on the list for one set of TX EQ settings for each FP and RP mic
sources. The correct "set" would come up based on the MIC SEL setting. 73 Greg AB7R -----Original Message----- From: [hidden email] [mailto:[hidden email]]On Behalf Of mark roz Sent: Monday, February 18, 2008 8:11 AM To: Elecraft Subject: Fwd: [Elecraft] K3 Equalization Memories - Missing? I was hoping that Equalization Memories will be available in the future. I'm using headset connected to the front of the radio and studio MIC on the back. With my set up it is not practical to use K3 EQ. Mark --- WB6MND <[hidden email]> wrote: > Date: Sun, 17 Feb 2008 20:19:29 -0800 (PST) > From: WB6MND <[hidden email]> > To: [hidden email] > Subject: [Elecraft] K3 Equalization Memories - > Missing? > > > I'm a new K3 owner and enjoying the unit for all the > reasons already stated > by others. > > But unless I've missed something, there are no > memories for the K3 TX and RX > Equalization settings. Is that correct? > > It would be extremely helplful to have such > memories. > > For example: > > I would like one Rcv Eq setting for weak CW signals, > where I kick up 400 hz > +10 db or so and drop the other eq bands. This > would help me pull the weak > CW sigs out of the noise better. Obviously this > setting would not be used > for SSB or strong CW sigs, where I'd want a flatter > eq curve. > > I'd like one Tx Eq setting for local ragchew work, > maximizing bandwidth and > freq response for best audio quality. Obviously, > this setting would not be > good for DX. For DX, I'd want more punch where the > midrange is kicked up > and the freq extremes are diminished. > > Having several eq memories would allow this > flexibility. As it is, each set > of eq curves for different purposes must be manually > entered. That's > awkward and time consuming. > > If I've missed something and this feature already > exists - great. If it > doesn't, it would be nice to have it. > > Les > WB6MND > Bay Area, California > > -- > View this message in context: > 7.html > Sent from the Elecraft mailing list archive at > Nabble.com. > > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ______________________________________________________________________ ______________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.20.7/1285 - Release Date: 2/18/2008 5:50 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.20.7/1285 - Release Date: 2/18/2008 5:50 AM _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
RE: K3 Equalization Memories - Missing?
|
|
Argh! I agree with the others that multiple TX EQ settings are a "must." Even with the Mark V, I've discovered that it's often very worthwhile to change transmit bandwidth, turn off/on the EDSP modulation and select from among the built in EDSP EQ based on conditions or operating style. A single setting - even one setting for the front panel input and one for the back panel input - don't do the K3 justice. 73, ... Joe, W4TV > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]] On Behalf Of AB7R > Sent: Monday, February 18, 2008 3:23 PM > To: mark roz; Elecraft > Subject: RE: [Elecraft] K3 Equalization Memories - Missing? > > > It's on the list for one set of TX EQ settings for each FP and RP mic > sources. The correct "set" would come up based on the MIC > SEL setting. > > 73 > Greg > AB7R > > > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]]On Behalf Of mark roz > Sent: Monday, February 18, 2008 8:11 AM > To: Elecraft > Subject: Fwd: [Elecraft] K3 Equalization Memories - Missing? > > > I was hoping that Equalization Memories will be > available in the future. > I'm using headset connected to the front of the radio > and studio MIC on the back. > > With my set up it is not practical to use K3 EQ. > > Mark > > --- WB6MND <[hidden email]> wrote: > > > Date: Sun, 17 Feb 2008 20:19:29 -0800 (PST) > > From: WB6MND <[hidden email]> > > To: [hidden email] > > Subject: [Elecraft] K3 Equalization Memories - > > Missing? > > > > > > I'm a new K3 owner and enjoying the unit for all the > > reasons already stated > > by others. > > > > But unless I've missed something, there are no > > memories for the K3 TX and RX > > Equalization settings. Is that correct? > > > > It would be extremely helplful to have such > > memories. > > > > For example: > > > > I would like one Rcv Eq setting for weak CW signals, > > where I kick up 400 hz > > +10 db or so and drop the other eq bands. This > > would help me pull the weak > > CW sigs out of the noise better. Obviously this > > setting would not be used > > for SSB or strong CW sigs, where I'd want a flatter > > eq curve. > > > > I'd like one Tx Eq setting for local ragchew work, > > maximizing bandwidth and > > freq response for best audio quality. Obviously, > > this setting would not be > > good for DX. For DX, I'd want more punch where the > > midrange is kicked up > > and the freq extremes are diminished. > > > > Having several eq memories would allow this > > flexibility. As it is, each set > > of eq curves for different purposes must be manually > > entered. That's > > awkward and time consuming. > > > > If I've missed something and this feature already > > exists - great. If it > > doesn't, it would be nice to have it. > > > > Les > > WB6MND > > Bay Area, California > > > > -- > > View this message in context: > > > http://www.nabble.com/K3-Equalization-Memories---Missing--tp15 > 538077p1553807 > 7.html > > Sent from the Elecraft mailing list archive at > > Nabble.com. > > > > _______________________________________________ > > Elecraft mailing list > > Post to: [hidden email] > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > > > > > ______________________________________________________________________ > ______________ > Be a better friend, newshound, and > know-it-all with Yahoo! Mobile. Try it now. > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.516 / Virus Database: 269.20.7/1285 - Release > Date: 2/18/2008 > 5:50 AM > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.516 / Virus Database: 269.20.7/1285 - Release > Date: 2/18/2008 > 5:50 AM > > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |