Forwarding to the list as per Dave's request.
---------- Forwarded Message ----------
Subject: Re: AGC Mod S-Meter
Date: March 7, 2007 07:35 pm
From: "Dave White" <
[hidden email]>
To:
[hidden email]
Hi Darrell:
I chose the values for the S Meter voltage feed to be the most accurate; S1
with 1uv and S9 with 50uv. It also allowed full range of the S Meter as the
RF gain control was rotated through its range. Its possible that other
values would work as well.
As to the C3 issue, I was using a REV D board (before the POT was installed
in R1), and thus the cct traces on my Control board might have been
different. The attachment position of C3 is not critical - as it is a DC
cct and C3 is used for suppression; it has no other affect.
You might want to pass this information on to the Reflector, as I no longer
have my K2 and am not receiving the digests any longer.
I'm glad the MOD is working out for you.
Regards
Dave
----- Original Message -----
From: "Darrell Bellerive" <
[hidden email]>
To: "Dave White" <
[hidden email]>
Sent: Wednesday, March 07, 2007 12:33 PM
Subject: AGC Mod S-Meter
> Dave,
>
> Could you please explain to me why you chose the range of 1 volt to 1.7
> volts
> for the S-meter range adjusted by RM3? Seems that higher voltages will
> yield
> a greater spread between S LO and S HI settings.
>
> By the way if you haven't read my post to the Elecraft list, I have
> installed
> your mod and am very pleased with it. By the way I am still waiting on an
> answer as to why your diagram shows C3 moving from U2 pin 5 to the RF Gain
> line.
>
> Thanks for a great mod!!!
>
> Darrell
>
> --
> Darrell Bellerive
> Amateur Radio Stations VA7TO and VE7CLA
> Grand Forks, British Columbia, Canada
-------------------------------------------------------
--
Darrell Bellerive
Amateur Radio Stations VA7TO and VE7CLA
Grand Forks, British Columbia, Canada
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
