Elecraft

Fwd: Re: CQ WW WPX RTTY

Classic

List

Threaded

3 messages Options

mark roz

Fwd: Re: CQ WW WPX RTTY

did dit dah dah doesn't work in my K3.

David,

Did you try that?
Mark
--- David Pratt <[hidden email]> wrote:

> Date: Sat, 9 Feb 2008 22:33:53 +0000
> To: Elecraft Reflector <[hidden email]>
> From: David Pratt <[hidden email]>
> Subject: Re: [Elecraft] CQ WW WPX RTTY
>
> In a recent message, G4ILO <[hidden email]>
> writes
> >One problem seems to be that when the RX; command
> is sent, the TX sends 3 or
> >4 seconds of idle before going to RX.
> Julian -
> You need to send di-di-dah-dah at the end of your
> transmission. It will
> then go immediately onto Receive. Page 32 refers to
> this, along with the
> break sign which will extend the idle time.
>
> 73
> --
> David G4DMP
> West Yorkshire, England, UK
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

Greg - AB7R

RE: Re: CQ WW WPX RTTY

You have to send it just as you would a single letter, no extra spacing.

73
Greg
AB7R

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]]On Behalf Of mark roz
Sent: Saturday, February 09, 2008 2:44 PM
To: Elecraft
Subject: Fwd: Re: [Elecraft] CQ WW WPX RTTY

did dit dah dah doesn't work in my K3.

David,

Did you try that?
Mark
--- David Pratt <[hidden email]> wrote:

______________________________________________________________________
______________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Andrew Faber

Re: Re: CQ WW WPX RTTY

This does work. I just made 4 qsos in the contest with Field Tester Ed
Muns, P49X, using my K3 without any special software. What works for me is
to record messages in memories in CW mode, then send them in Data mode (FSK
D). At the end of each message add the character Greg describes, all sent
as one character. Make sure the text decoder seems to be reading the
message correctly, as sometimes either less or more spacing than sounds
right on CW seems to be necessary to get the message just right. The TX
TEST mode is very helpful for this.
73, Andy, AE6Y
----- Original Message -----
From: "Greg" <[hidden email]>
To: "mark roz" <[hidden email]>; "Elecraft"
<[hidden email]>
Sent: Saturday, February 09, 2008 3:53 PM
Subject: RE: Re: [Elecraft] CQ WW WPX RTTY

> You have to send it just as you would a single letter, no extra spacing.
>
> 73
> Greg
> AB7R
>
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]]On Behalf Of mark roz
> Sent: Saturday, February 09, 2008 2:44 PM
> To: Elecraft
> Subject: Fwd: Re: [Elecraft] CQ WW WPX RTTY
>
>
> did dit dah dah doesn't work in my K3.
>
> David,
>
> Did you try that?
> Mark
> --- David Pratt <[hidden email]> wrote:
>
>> Date: Sat, 9 Feb 2008 22:33:53 +0000
>> To: Elecraft Reflector <[hidden email]>
>> From: David Pratt <[hidden email]>
>> Subject: Re: [Elecraft] CQ WW WPX RTTY
>>
>> In a recent message, G4ILO <[hidden email]>
>> writes
>> >One problem seems to be that when the RX; command
>> is sent, the TX sends 3 or
>> >4 seconds of idle before going to RX.
>> Julian -
>> You need to send di-di-dah-dah at the end of your
>> transmission. It will
>> then go immediately onto Receive. Page 32 refers to
>> this, along with the
>> break sign which will extend the idle time.
>>
>> 73
>> --
>> David G4DMP
>> West Yorkshire, England, UK
>>
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: [hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>>
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>
>
>
>
> ______________________________________________________________________
> ______________
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com