I meant since January 2009 ...
Dave AB7E
-------- Original Message --------
Subject: Re: [Elecraft] Power supply voltage
Date: Mon, 23 Aug 2010 17:04:29 -0700
From: David Gilbert <
[hidden email]>
To:
[hidden email]
The K3 is rated for use up to 15 volts DC, and I regularly run mine at
14.5 volts for better transmit linearity. I've had it since January of
2008 and it has been through several pretty intensive contest operations
since then without a single glitch.
73,
Dave AB7E
> On 8/23/2010 7:13 PM, George A. Thornton wrote:
>> I am about to put together a backup power supply system. I have AGM
>> cell batteries and will be using a West Mountain PowerGate P40s and an
>> Astron RM35 power supply.
>>
>>
>>
>> The West Mountain literature recommends that I boost the power supply
>> voltage to 14.5 volts in order to assure proper battery charging for the
>> AGM batteries.
>>
>>
>>
>> What will 14.5 volts do to the K3? Am I risking something here, or is
>> there no problem with this setup?
>>
>> _
> _
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
