Fwd: What Two Bands would you pick for a K1?

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Fwd: What Two Bands would you pick for a K1?

Michael Babineau-2
Whoops .. forgot to send to the group ;-)

> Begin forwarded message:
>
> From: Michael Babineau <[hidden email]>
> Subject: Re: [Elecraft] What Two Bands would you pick for a K1?
> Date: January 26, 2017 at 9:14:46 AM GMT-5
> To: [hidden email]
>
> I agree with Mike.  My choice for a 2 band K1 would be 40m/20m.  Although 30m is a great band, it seems to rely on having a few sunspots .
> Propagation lately on 30m has been very poor, whereas 40m is doing great. In spite of the lack of sunspots 20m meters still has its moments.
>
> When I built my 4 band K1, I went with 40m/30m/20m/17m, the rational being that this gave me (more or less) a set of daytime/nightime bands that were Non-WARC and WARC
> so I could choose to participate (or not participate) on a busy contest weekend, depending on my mood.
>
> Michael VE3WMB
>
> P.S. The great thing is that you can always choose to build up a second 2 band board with different bands on it. It is a bit of a PITA to change out the band boards, even more so if you
> have a KAT1 installed, but it can be done in few minutes.
>
>
> >From: Mike Morrow <[hidden email] <mailto:[hidden email]>>
> >Subject: Re: [Elecraft] What Two Bands would you pick for a K1?
> >Date: January 25, 2017 at 3:09:13 PM GMT-5
> >To: Harry Yingst <[hidden email] <mailto:[hidden email]>>, Elecraft Reflector <[hidden email] <mailto:[hidden email]>>
> >Reply-To: Mike Morrow <[hidden email] <mailto:[hidden email]>>
>
>
>
>> What Two Bands would you pick for a K1?
>> My first thoughts are 40 and 15,
>
> >There are only six bands that Elecraft supports with KFL1-2 band parts:  80m, 40m, 30m, 20m, 17m, 15m.  Some have customized their own boards for other bands, notably 160m and 10m.
>
> >When I built a K1 in 2000, only two-band filter boardz were available.  I built two filter boards, one for 40m/20m, and one for 30m/15m.  I used those until the KFL1-4 four-band board for all four of those bands was available.  I converted the >40m/20m KFL1-2 to 80m/17m.
>
> >Without any doubt or question, if I were limited to one two-band board, 40m/20m would easily be my choice even as we head further into a long (perhaps very long) period of minimal solar activity.
>
> >Mike / KK5F

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]