Set mic settings to FPL; it may be set to H. The MH2 is a pretty hot
microphone; no need to set gain to high.
73 de James K2QI
On Thu, Nov 5, 2009 at 12:58 AM, Bill Davis Jr <
[hidden email]> wrote:
>
> I am having the same kind of reports with my K3 #3460 and a MH2 --- I have
> to run mike gain control VERY low 6 or less to keep in the good ALC range.
>
> Bill K0AWU EN37ed
>
>
>
> > To:
[hidden email]
> > Date: Wed, 4 Nov 2009 22:22:21 -0700
> > Subject: [Elecraft] k3 Mic Suggestions
> >
> > I am the new owner of K3 Serial #3605 and love it. I have been using a
> > couple of HC5 mics and have been getting criticism on my audio quality
> like
> > distorted, no energy below 400hz, chopped up sounding. I am running
> less
> > than 10db compression and staying within recommended ALC limits and no
> Bias.
> > I have tried various TX EQ settings. I would like to know what mics are
> > being used with the K3 and getting good audio quality reports.
> >
> > Thanks,
> >
> > Bob W6TR Fort Collins, CO
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
--... ...-- -.. . .--- .- -- . ...
Locked
