Hello All,
Well I finally got it all together and working Sorta.
I have Hi current on 160M and with the requested power
set at 5.0W
I only get .3 out. The Hi Cur is on for about 2
seconds and then goes
to show you the power out. On 80 I have the same thing
but power is
normal. I tried setting the Cal Cur to 2.8 with no
avail but the power ou
on 160 goes to 1.2W.
I went through the archives and found 1 entry for the
160 and the Hi
Current and tried Resoldering the c31-33 with no avail
I have gone
through and re soldered all the solder joints around
the 80m band pass
filter section so what am I overlooking
Thanks
David KR4OW
__________________________________
Do you Yahoo!?
Meet the all-new My Yahoo! - Try it today!
http://my.yahoo.com
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com