HI Current

[Elecraft mailing list]

 From the firmware release notes:

<quote>
K3 MCU 5.66 / DSP 2.88 / FPF 1.26, 11-28-2018

* ADDED SWR READ COMMAND:  "SW;" returns the most recent SWR reading in
transmit or TUNE mode, e.g. "SW023;" for an SWR of 2.3:1. Max value
returned is "SW99;" (SWR = 99.9:1).

K3 MCU 5.64 / DSP 2.88 / FPF 1.26, 2-22-2018

* RCV MODE "HI CUR" THRESHOLD CHANGED:  The threshold at which "HI CUR"
(excessive current drain) warnings appear in receive mode has been
increased. Some users with all options enabled (including the sub
receiver, internal transverter, and K-Pod) were seeing spurious HI-CUR
warnings and disabling of one speaker channel.
<unquote>

Enjoy,

Mike VP8NO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]