HL-45B with KX3

[Doug Person-3]

I just received my KX3 kit.  Once built, I intend to try it with my
Tokyo Hy-Power HL-45B amplifier.  I get an easy 50 watts out with my
FT-817.  I wonder if anyone else has tried this?

73, Doug -- K0DXV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Nr4c]

I'm using a 50B, works well.


...bill nr4c
Sent from my Verizon Wireless Droid

-----Original message-----
From: Doug Person <[hidden email]>
To: [hidden email]
Sent: Thu, Aug 16, 2012 02:39:43 GMT+00:00
Subject: [Elecraft] HL-45B with KX3

I just received my KX3 kit.  Once built, I intend to try it with my
Tokyo Hy-Power HL-45B amplifier.  I get an easy 50 watts out with my
FT-817.  I wonder if anyone else has tried this?

73, Doug -- K0DXV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Javier Campos-3]

What setting did you use for the ACC2 output to connect to the amp?

TX-Low? (ground to key amp?)

I have been meaning to try it with my Acom 1011 amp as that is also a TX Low setting here at the home QTH in Dallas.

I am buying a friends HL-200BDX that's sitting in his closet in the Bay Area to use in the Cal QSO Party from San Francisco in a few weeks with the KX3 driving it to about 180 watts with 10 watts drive (theoretically).  

Let me know!

Javier NM6E/5


Please excuse any mis-spelling

Sent from my iPhone

On Aug 15, 2012, at 11:02 PM, "Bill Conkling"<[hidden email]> wrote:

> I'm using a 50B, works well.
>
>
> ...bill nr4c
> Sent from my Verizon Wireless Droid
>
> -----Original message-----
> From: Doug Person <[hidden email]>
> To: [hidden email]
> Sent: Thu, Aug 16, 2012 02:39:43 GMT+00:00
> Subject: [Elecraft] HL-45B with KX3
>
> I just received my KX3 kit.  Once built, I intend to try it with my
> Tokyo Hy-Power HL-45B amplifier.  I get an easy 50 watts out with my
> FT-817.  I wonder if anyone else has tried this?
>
> 73, Doug -- K0DXV
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html