Dave,
Using 1 serial port (a real one, not a USB) I
have no problems using both HRD and Digital Master 780 at the same time on my
K3. I have not tried this with a usb port yet but it may work.
First you have to be sure that your K3 is being
controlled by HRD. Then you have to enable the IP Server (under the Tools
Menu).
Go into DM 780, select radio and configure it for
the K3. Afterward you might configure some of the control buttons and sliders
for K3 controls.
Now after booting up HRD, then DM 780 one of the
last things in the booting process is connection to the K3. You will know
this when you see the rig,s frequency displayed on DM780.
Hope this helps.
73
Dave KD1NA
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
