Have AF control both the Main & SUB volume

[Gary Smith-2]

I'm trying to set up the K3s to have both
the sub and main controlled by the AF knob
and not finding what I had done before.

Looking at the manual under CONFIG:SQ MAIN
it says:

SUB RF gain normally sets the sub
receiver´s RF GAIN level. If this knob is
assigned to main/sub squelch (CONFIG:SQ
MAIN), then RF gain for main/sub is
controlled by the main RF gain control.

When I go to CONFIG:SQ MAIN and select via
VFO A it offers numbers ranging from 1-29
and then it says =Sub Pot With two options
of SQ MAIN and SQL N/A which defaults back
to SQ MAIN.

None of the above locks the volume of the
Sub to the Main like I had it set on the
K3, AF still controls the main and SUB
controls the SUB volume.

I am missing the obvious.

Suggestions?

Thanks & 73,

Gary
KA1J

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Vic Rosenthal]

Gary,

What you want is CONFIG:SUB AF = BALANCE

73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
http://www.qsl.net/k2vco/
On 1 Nov 2017 04:17, Gary Smith wrote:

> I'm trying to set up the K3s to have both
> the sub and main controlled by the AF knob
> and not finding what I had done before.
>
> Looking at the manual under CONFIG:SQ MAIN
> it says:
>
> SUB RF gain normally sets the sub
> receiver´s RF GAIN level. If this knob is
> assigned to main/sub squelch (CONFIG:SQ
> MAIN), then RF gain for main/sub is
> controlled by the main RF gain control.
>
> When I go to CONFIG:SQ MAIN and select via
> VFO A it offers numbers ranging from 1-29
> and then it says =Sub Pot With two options
> of SQ MAIN and SQL N/A which defaults back
> to SQ MAIN.
>
> None of the above locks the volume of the
> Sub to the Main like I had it set on the
> K3, AF still controls the main and SUB
> controls the SUB volume.
>
> I am missing the obvious.
>
> Suggestions?
>
> Thanks & 73,
>
> Gary
> KA1J
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Gary Smith-2]

Yes, Victor, that was it. Thank you!  

I was trying to find what I needed and
searched the pdf for AF hoping to find
what I needed and the reading led to
balance and it was late...

Thanks, this is exactly what I wanted.

73,

Gary
KA1J

> Gary,
>
> What you want is CONFIG:SUB AF = BALANCE
>
> 73,
> Victor, 4X6GP
> Rehovot, Israel
> Formerly K2VCO
> http://www.qsl.net/k2vco/
> On 1 Nov 2017 04:17, Gary Smith wrote:
> > I'm trying to set up the K3s to have both
> > the sub and main controlled by the AF knob
> > and not finding what I had done before.
> >
> > Looking at the manual under CONFIG:SQ MAIN
> > it says:
> >
> > SUB RF gain normally sets the sub
> > receiver´s RF GAIN level. If this knob is
> > assigned to main/sub squelch (CONFIG:SQ
> > MAIN), then RF gain for main/sub is
> > controlled by the main RF gain control.
> >
> > When I go to CONFIG:SQ MAIN and select via
> > VFO A it offers numbers ranging from 1-29
> > and then it says =Sub Pot With two options
> > of SQ MAIN and SQL N/A which defaults back
> > to SQ MAIN.
> >
> > None of the above locks the volume of the
> > Sub to the Main like I had it set on the
> > K3, AF still controls the main and SUB
> > controls the SUB volume.
> >
> > I am missing the obvious.
> >
> > Suggestions?
> >
> > Thanks & 73,
> >
> > Gary
> > KA1J
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to [hidden email]
> >
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]