Thanks but I left out one important fact for you, the LH radio speaker
works fine when SPKR+PH = YES, and I get both headphones and speaker
output. Part of the problem is I don't know how long it's been like
this, as I have had phones plugged in all the time, that is until this
weekend when I was rearranging the operating layouts.
On Monday, July 25, 2011, Don Wilhelm <
[hidden email]> wrote:
> Ron,
>
> Have you removed the top cover to check that the speaker connector is plugged in. If not, that is the first thing I would check.
>
> 73,
> Don W3FPR
>
> On 7/25/2011 5:26 PM, Ron N5QQ wrote:
>
> I have two K3's on the operating desk that are very similar except in
> one way and I can not fine the setting or configuration to correct it.
> At present both the rigs are set SPKRS+PH = NO and SPKRS = 1. This
> gives me the internal speaker only when headphones are not plugged in,
> and then headphones only (no speaker) when they are plugged in.
> BUT the LH rig gives me headphones when they are plugged in (no
> speaker) and NOTHING at all when the headphone jack is unplugged. This
> is acting like I have external speakers plugged in, which I don't
> have. Am I missing something obvious?
> At this time there is no SO2R mic/phones/cw controller involved and
> the only other connection is the interface to my PC (with N1MM).
> Ron
>
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
