Help setting up digital

[Edward A. Dauer]

I’d walk a mile for a K4.  

Outstanding.  And they are IMDl.

Ted, KN1CBR
   
   
    ------------------------------
   
    Message: 7
    Date: Mon, 20 Mar 2017 08:30:42 -0400
    From: "Charlie T, K3ICH" <[hidden email]>
    To: <[hidden email]>
    Subject: Re: [Elecraft] Help setting up digital
    Message-ID: <004301d2a175$ce747570$6b5d6050$@erols.com>
    Content-Type: text/plain; charset="us-ascii"
   
    Why would you think that?
   
    Did it taste good like RTTY should?
   
    And I'll bet there wasn't a cough in a carrier either.....
   
    If I REALLY date myself, did the "green go to war"? (with QRM ??)
   
    73, Charlie k3ICH
   
    -----Original Message-----
    From: Elecraft [mailto:[hidden email]] On Behalf Of Bob
    Nielsen
    Sent: Monday, March 20, 2017 2:49 AM
    To: [hidden email]
    Subject: Re: [Elecraft] Help setting up digital
   
    Hmm, why does this make me think of an old cigarette advertisement?
   
    Bob,N7XY
   
   
    On 3/19/17 1:19 PM, Lynn W. Taylor, WB6UUT wrote:
    > Low Space Means Fine Teletype....
   
    ______________________________________________________________
 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Wes Stewart-2]

I have also been disappointed with the internal sound card in the K3S as
compared to just using the internal sound card in my Lenovo laptop with my
original K3.
There is natural interaction between the K3S level (mic) control and the sound
card level but it's a hair triggered operation to get the ALC set.... and
regrettably the VOX and Anti-VOX gains are along for the ride.  Get the latter
set for RTTY and they can be off on SSB because the "experts" think that the VOX
takeoff point should be after the mic gain control.  (If you surmise that I
disagree with this, you are correct.)

Wes  N7WS


On 3/20/2017 7:57 AM, Terry Schieler wrote:
> Thanks for the particularly timely  reply, Don.  I spent the past weekend trying to get my K3S set up for RTTY with MMTTY.  My old K3 (474) worked just fine for years.  Using Data A, AFSK, 45 baud, I can cleanly copy RTTY and Transmit via VOX, but, for the life of me, I cannot get the ALC set to "4 bars solid with the 5th bar flashing".  I can get it to set to 3 bars solid or 5 bars solid but nothing in between, no matter how sensitive I try to be.  Seems I recall someone else with this exact issue on her a few weeks ago.  I have spent this morning trying to find that post as I'm pretty sure his problem was solved.  I am setting the ALC via the Mic (Line) Gain.  I checked that Data A had reduced Compression to ZERO and TX EQ flat.  Any suggestions?
>
> 73, Terry W0FM
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]