Help!

[Roger D Johnson]

I just finished the connector mod and replaced some of the encoders. All seemed
to go well until I noticed that NONE of the front panel LEDs were lit!

has anyone been down this road before?

73, Roger

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Vic Rosenthal]

K3 I presume?
Make sure the front panel is plugged into the RF board correctly (i.e.,
not shifted over to one side).

73,
Vic, 4X6GP
Rehovot, Israel
Formerly K2VCO
http://www.qsl.net/k2vco/

On 23 Jun 2016 19:59, Roger D Johnson wrote:
> I just finished the connector mod and replaced some of the encoders. All
> seemed
> to go well until I noticed that NONE of the front panel LEDs were lit!
>
> has anyone been down this road before?
>
> 73, Roger
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Roger D Johnson]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]