Help with Alignment Test - Collecter

[Allan Bacon]

On page 71 of the assembly manual - Resistance Checks I do not know what
the collector and base of Q6/Q7 are. Any help will be sincerely
appreciated. I know what/where Q6/Q7 are, but cannot find a definition of
the parts to check for resistance to ground.


Q7 Collector
Q6 base
Q7 base


Thanks in advance
73,
Al

KI4HRN
Allan Bacon
[hidden email]  
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Alan,

Just look on the PC board silk screening - the C B E designators are printed
on th eboard for these transistors.  If you still have trouble turn to the
K2 Schematic Key sheet in Appendix B of the manual and you will find an
outline of the transistors to aid you in identifying the proper pin.

73,
Don W3FPR

> -----Original Message-----
>
> On page 71 of the assembly manual - Resistance Checks I do not know what
> the collector and base of Q6/Q7 are. Any help will be sincerely
> appreciated. I know what/where Q6/Q7 are, but cannot find a definition of
> the parts to check for resistance to ground.
>
>
> Q7 Collector
> Q6 base
> Q7 base
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com