Help with KIO3b RJ45 to Windows 10

[Bob KD7YZ]

Hello K3,

I need some help trying to make Win-10 talk to the K3.
The K3 Utility just wont find the K3.

I've only got the RJ45 like connector as a while back the KIO3B's USB receptacle just fell off  the board.

I've tried K3 Config RS232 to 38400 as-well-as USB.

any help would be wonderful
--
Best regards,
Bob KD7YZ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob KD7YZ]

Thanks for the direct-email help

I found my Elecraft cable for RJ45 to RS232

the next issue was correct settings in the K3 the with baud rate on the COM1 port

all is well now.


--
Best regards,
Bob KD7YZ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]