Help with KPA1500 P/S

[Salvatore Ted K2QMF]

Hello All,
How do you remove the PowerPoll P/S connector from the back of the KPA1500??
Any help much appreciated!
I don't want to force them out!
Thanks,
Sal  K2QMF

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Dave wo2x]

Are you talking about removing the cable from the amp? It just pulls out. There is some tension on the contacts so it will require a little force. Just pull straight out.

If you are talking about the chassis mounted Power Poles, there are screws on the inside that hold a bracket and wedge which keep them secure to the chassis.

Dave wo2x


-----Original Message-----
From: [hidden email] <[hidden email]> On Behalf Of Salvatore Ted K2QMF
Sent: Monday, June 8, 2020 4:02 PM
To: [hidden email]
Subject: [Elecraft] Help with KPA1500 P/S

Hello All,
How do you remove the PowerPoll P/S connector from the back of the KPA1500??
Any help much appreciated!
I don't want to force them out!
Thanks,
Sal  K2QMF

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]