Guys,
Was trying to figure out whether this is necessary. (not a big deal but
extracting the K3 from the bunch of connection is a pain)
It appears to me that this mod may be needed if one has two radios and
an A/B switch which has insufficient port to port isolation.
Some hand calcs (assuming an A/B switch with 40db isolation)
A radio running 100 w
B radio attached to the other port
Hand calcs indicate 780 mv possible at the input terminals of B.
S9+60db is 50 mv. It seems like 780mv is high enough to require this
protection mod. (when the K3 is transmitting the B radio would also
need protection.....)
It is not clear at all how the A/B switch isolation is measured and
whether it is db power or db voltage. Yes, some A/B switches ground the
unused ports. Is that included in the isolation figure quoted?
Does anybody have some quantitative data?
73 de Brian/K3KO
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.62/2315 - Release Date: 08/20/09 06:05:00
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
