Bill:
You don't tell us where the MFJ is going into the line. Is the
same coax that feeds the antenna being plugged into the MFJ? or is it
reading from a different point?
dave belsley, w1euy
> My K2/100 is indicating high current draw on a portion of 40 meters
> but only on the antenna. On the dummy load there is no problem.
> It's not high SWR as both antennas it happens with (double bazooka
> and ground mounted Butternut vert) indicate low SWR on my MFJ
> analyzer, SWR meter and the K2. This occurs at full power of around
> 100 watts. Any ideas on what may be causing this? I'm using my
> Drake PS7 power supply which has more than enough amperage and
> minimal voltage drop.
>
> Thanks and 73,
>
> Bill NZ0T
--------------------------------------------
david a belsley
professor of economics
boston college
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
