Elecraft › [HAM]

High Sierra in qst

Classic

List

Threaded

15 messages Options

ussv dharma

High Sierra in qst

Be careful...very bad experience with HIGH SIERRA advertising in QST

If you don't change direction you WILL arrive exactly where you're headed!!

Susan Meckley, Skipper W7KFI-mm AFA9SM
USSV DHARMA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

David Cutter

Re: High Sierra in qst

Haven't seen it in QST yet, but I've used mine a few times without mishap.
They are a bit noisy when tuning: the mast amplifies the sound quite a bit -
shouldn't be fitted to a wall or chimney joining to your neighbour's. What
is your experience?

David
G3UNA

----- Original Message -----
From: "ussv dharma" <[hidden email]>
To: <[hidden email]>
Sent: Tuesday, April 24, 2012 4:31 PM
Subject: [Elecraft] High Sierra in qst

Be careful...very bad experience with HIGH SIERRA advertising in QST

If you don't change direction you WILL arrive exactly where you're headed!!

Susan Meckley, Skipper W7KFI-mm AFA9SM
USSV DHARMA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Eric Swartz - WA6HHQ

Re: High Sierra in qst

Administrator

I use the High Sierra Sidekick screwdriver antenna for my HF mobile. It
is very reliable and works great. Excellent service from Jim at High
Sierra too.

73,

Eric WA6HHQ
---
www.elecraft.com

On 4/24/2012 10:54 AM, David Cutter wrote:
> Haven't seen it in QST yet, but I've used mine a few times without mishap.
> They are a bit noisy when tuning: the mast amplifies the sound quite a bit -
> shouldn't be fitted to a wall or chimney joining to your neighbour's. What
> is your experience?
>
> David
> G3UNA
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Steve Reed

Re: High Sierra in qst

I use the High Sierra HS1800 Pro antenna with my K3 at the QTH (I live in a
restricted neighborhood). It works flawlessly, can't be seen by the
neighborhood HOA cops, and has low SWR across all bands. Not sure if the
HS1800 is made anymore, but from my experience High Sierra is a good
company.

Steve, AI7AZ

On Tue, Apr 24, 2012 at 11:40 AM, Eric Swartz - WA6HHQ, Elecraft <
[hidden email]> wrote:

> I use the High Sierra Sidekick screwdriver antenna for my HF mobile. It
> is very reliable and works great. Excellent service from Jim at High
> Sierra too.
>
> 73,
>
> Eric WA6HHQ
> ---
> www.elecraft.com
>
>
> On 4/24/2012 10:54 AM, David Cutter wrote:
> > Haven't seen it in QST yet, but I've used mine a few times without
> mishap.
> > They are a bit noisy when tuning: the mast amplifies the sound quite a
> bit -
> > shouldn't be fitted to a wall or chimney joining to your neighbour's.
> What
> > is your experience?
> >
> > David
> > G3UNA
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

ussv dharma

Re: High Sierra in qst

Sorri peoples...I was referring to co. named High Sierra advertising in QST...I find them somewhat lacking

If you don't change direction you WILL arrive exactly where you're headed!!

Susan Meckley, Skipper W7KFI-mm AFA9SM
USSV DHARMA

________________________________
From: Steve Reed <[hidden email]>
To: [hidden email]
Cc: David Cutter <[hidden email]>; ussv dharma <[hidden email]>; [hidden email]
Sent: Tuesday, April 24, 2012 8:09 AM
Subject: Re: [Elecraft] High Sierra in qst

I use the High Sierra HS1800 Pro antenna with my K3 at the QTH (I live in a restricted neighborhood). It works flawlessly, can't be seen by the neighborhood HOA cops, and has low SWR across all bands. Not sure if the HS1800 is made anymore, but from my experience High Sierra is a good company.

Steve, AI7AZ

On Tue, Apr 24, 2012 at 11:40 AM, Eric Swartz - WA6HHQ, Elecraft <[hidden email]> wrote:

I use the High Sierra Sidekick screwdriver antenna for my HF mobile. It

>is very reliable and works great. Excellent service from Jim at High
>Sierra too.
>
>73,
>
>Eric WA6HHQ
>---
>www.elecraft.com
>
>
>On 4/24/2012 10:54 AM, David Cutter wrote:
>> Haven't seen it in QST yet, but I've used mine a few times without mishap.
>> They are a bit noisy when tuning: the mast amplifies the sound quite a bit -
>> shouldn't be fitted to a wall or chimney joining to your neighbour's. What
>> is your experience?
>>
>> David
>> G3UNA
>>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>

David Gilbert

Re: High Sierra in qst

They are one and the same company. Any chance you could explain what
you were disappointed in? "Lacking" is pretty vague ...

73,
Dave AB7E

On 4/24/2012 1:17 PM, ussv dharma wrote:
> Sorri peoples...I was referring to co. named High Sierra advertising in QST...I find them somewhat lacking
>
>
> If you don't change direction you WILL arrive exactly where you're headed!!
>
> Susan Meckley, Skipper W7KFI-mm AFA9SM
> USSV DHARMA
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: High Sierra in qst

In reply to this post by ussv dharma

What did you buy from High Sierra that disappointed you Susan? Or was it their service that was not to your liking? I see connector crimpers, heat guns, drill bits and such advertised. I have not dealt with them, but I have had a good impression from what I have heard and read.

Willis 'Cookie' Cooke
K5EWJ & Trustee N5BPS, USS Cavalla, USS Stewart

________________________________
From: ussv dharma <[hidden email]>
To: Steve Reed <[hidden email]>; "[hidden email]" <[hidden email]>
Cc: "[hidden email]" <[hidden email]>
Sent: Tuesday, April 24, 2012 3:17 PM
Subject: Re: [Elecraft] High Sierra in qst

Sorri peoples...I was referring to co. named High Sierra advertising in QST...I find them somewhat lacking

If you don't change direction you WILL arrive exactly where you're headed!!

Susan Meckley, Skipper W7KFI-mm AFA9SM
USSV DHARMA

________________________________
From: Steve Reed <[hidden email]>
To: [hidden email]
Cc: David Cutter <[hidden email]>; ussv dharma <[hidden email]>; [hidden email]
Sent: Tuesday, April 24, 2012 8:09 AM
Subject: Re: [Elecraft] High Sierra in qst

I use the High Sierra HS1800 Pro antenna with my K3 at the QTH (I live in a restricted neighborhood). It works flawlessly, can't be seen by the neighborhood HOA cops, and has low SWR across all bands. Not sure if the HS1800 is made anymore, but from my experience High Sierra is a good company.

Steve, AI7AZ

On Tue, Apr 24, 2012 at 11:40 AM, Eric Swartz - WA6HHQ, Elecraft <[hidden email]> wrote:

I use the High Sierra Sidekick screwdriver antenna for my HF mobile. It

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

k6dgw

Re: High Sierra in qst

On 4/24/2012 3:36 PM, WILLIS COOKE wrote:
> What did you buy from High Sierra that disappointed you Susan? Or
> was it their service that was not to your liking? I see connector
> crimpers, heat guns, drill bits and such advertised. I have not
> dealt with them, but I have had a good impression from what I have
> heard and read.

I know Jim personally, he lives about 9 miles north of me and I see him
often, please give us some details Susan.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2012 Cal QSO Party 6-7 Oct 2012
- www.cqp.org

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

va3bxg

MAC KX3 utility

tried the mac version of the KX3 utility. it did not work

and here is the senerio.

i have fusion. running windows 7 i have no problem connecting to the
utility. it recognizes the USB driver ( in my case COM3) update firmware
etc works

so now after installing the USB driver on the mac side, the error
message comes back KX3 not responding when i test the connection.

in this case i only have two Bluetooth port options aand niether work.

running snow leopard

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

David Fleming-2

Re: MAC KX3 utility

Robert,

If you are seeing only the bluetooth ports, then the USB/Serial driver is either too old or not installed properly on Snow Leopard. What type of USB/Serial adapter are you using? If it is a Prolific based device, you will need to install the most current driver. This one:

http://w4smt.com/KX3/md_PL2303_MacOSX10.6_dmg_v1.4.0.zip

If it is a FTDI based device, install this one:

http://w4smt.com/KX3/FTDIUSBSerialDriver_v2_2_17.dmg

This should solve the problem.

David, W4SMT

--- On Tue, 4/24/12, Robert Galambos <[hidden email]> wrote:

> From: Robert Galambos <[hidden email]>
> Subject: [Elecraft] MAC KX3 utility
> To: [hidden email]
> Date: Tuesday, April 24, 2012, 11:52 PM
> tried the mac version of the KX3
> utility. it did not work
>
> and here is the senerio.
>
> i have fusion. running windows 7 i have no problem
> connecting to the
> utility. it recognizes the USB driver ( in my case COM3)
> update firmware
> etc works
>
> so now after installing the USB driver on the mac side, the
> error
> message comes back KX3 not responding when i test the
> connection.
>
> in this case i only have two Bluetooth port options aand
> niether work.
>
> running snow leopard
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

David Fleming-2

Re: MAC KX3 utility

Also, if Fusion is still running, you will need to disconnect the USB/Serial adapter from the Windows virtual session. Else, OS X will not see it.

David, W4SMT

--- On Wed, 4/25/12, David Fleming <[hidden email]> wrote:

> From: David Fleming <[hidden email]>
> Subject: Re: [Elecraft] MAC KX3 utility
> To: "Elecraft reflector" <[hidden email]>
> Cc: [hidden email]
> Date: Wednesday, April 25, 2012, 12:08 AM
> Robert,
>
> If you are seeing only the bluetooth ports, then the
> USB/Serial driver is either too old or not installed
> properly on Snow Leopard. What type of USB/Serial adapter
> are you using? If it is a Prolific based device, you will
> need to install the most current driver. This one:
>
> http://w4smt.com/KX3/md_PL2303_MacOSX10.6_dmg_v1.4.0.zip
>
> If it is a FTDI based device, install this one:
>
> http://w4smt.com/KX3/FTDIUSBSerialDriver_v2_2_17.dmg
>
> This should solve the problem.
>
> David, W4SMT
>
>
> --- On Tue, 4/24/12, Robert Galambos <[hidden email]>
> wrote:
>
> > From: Robert Galambos <[hidden email]>
> > Subject: [Elecraft] MAC KX3 utility
> > To: [hidden email]
> > Date: Tuesday, April 24, 2012, 11:52 PM
> > tried the mac version of the KX3
> > utility. it did not work
> >
> > and here is the senerio.
> >
> > i have fusion. running windows 7 i have no problem
> > connecting to the
> > utility. it recognizes the USB driver ( in my case
> COM3)
> > update firmware
> > etc works
> >
> > so now after installing the USB driver on the mac side,
> the
> > error
> > message comes back KX3 not responding when i test the
> > connection.
> >
> > in this case i only have two Bluetooth port options
> aand
> > niether work.
> >
> > running snow leopard
> >
> >
> >
> ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

K4KGG

Re: High Sierra in qst

In reply to this post by ussv dharma

Eric, Group -

I own a High Sierra screwdriver antenna purchased in 2001 and
used portable on the back of my RV all around the US and Canada. The
antenna has needed several new contact springs, but has provided
reliable service given regular maintenance. However, my experience with
Jim and with High Sierra customer service has been consistently poor. No
customer service by phone, emails unanswered. I have found Jim to be
arrogant, offensive and unhelpful. This is a strong statement, but it
accurately reflects my experience. My unit has served me well but I
would not consider buying another antenna from this company.

K4KGG, Larry
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

va3bxg

Re: MAC KX3 utility

In reply to this post by David Fleming-2

got it to work BUT now, even when i clicked on 'versions now' (firmware
tab) the 'available' stats is 'missing'

and yes, i do have connectivity and no firewall

check for new

On 12-04-25 12:23 AM, David Fleming wrote:

> Also, if Fusion is still running, you will need to disconnect the USB/Serial adapter from the Windows virtual session. Else, OS X will not see it.
>
> David, W4SMT
>
> --- On Wed, 4/25/12, David Fleming<[hidden email]> wrote:
>
>> From: David Fleming<[hidden email]>
>> Subject: Re: [Elecraft] MAC KX3 utility
>> To: "Elecraft reflector"<[hidden email]>
>> Cc: [hidden email]
>> Date: Wednesday, April 25, 2012, 12:08 AM
>> Robert,
>>
>> If you are seeing only the bluetooth ports, then the
>> USB/Serial driver is either too old or not installed
>> properly on Snow Leopard. What type of USB/Serial adapter
>> are you using? If it is a Prolific based device, you will
>> need to install the most current driver. This one:
>>
>> http://w4smt.com/KX3/md_PL2303_MacOSX10.6_dmg_v1.4.0.zip
>>
>> If it is a FTDI based device, install this one:
>>
>> http://w4smt.com/KX3/FTDIUSBSerialDriver_v2_2_17.dmg
>>
>> This should solve the problem.
>>
>> David, W4SMT
>>
>>
>> --- On Tue, 4/24/12, Robert Galambos<[hidden email]>
>> wrote:
>>
>>> From: Robert Galambos<[hidden email]>
>>> Subject: [Elecraft] MAC KX3 utility
>>> To: [hidden email]
>>> Date: Tuesday, April 24, 2012, 11:52 PM
>>> tried the mac version of the KX3
>>> utility. it did not work
>>>
>>> and here is the senerio.
>>>
>>> i have fusion. running windows 7 i have no problem
>>> connecting to the
>>> utility. it recognizes the USB driver ( in my case
>> COM3)
>>> update firmware
>>> etc works
>>>
>>> so now after installing the USB driver on the mac side,
>> the
>>> error
>>> message comes back KX3 not responding when i test the
>>> connection.
>>>
>>> in this case i only have two Bluetooth port options
>> aand
>>> niether work.
>>>
>>> running snow leopard
>>>
>>>
>>>
>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>

Dick Dievendorff

Re: MAC KX3 utility

Try clicking the "Copy files from Elecraft" button to get the "missing"
files from the Elecraft file server.
There may be a troubleshooting section in Help on "Missing" files.

Dick, K6KR

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Robert Galambos
Sent: Wednesday, April 25, 2012 3:28 PM
To: [hidden email]
Cc: [hidden email]
Subject: Re: [Elecraft] MAC KX3 utility

got it to work BUT now, even when i clicked on 'versions now' (firmware
tab) the 'available' stats is 'missing'

and yes, i do have connectivity and no firewall

check for new

On 12-04-25 12:23 AM, David Fleming wrote:
> Also, if Fusion is still running, you will need to disconnect the
USB/Serial adapter from the Windows virtual session. Else, OS X will not see
it.

>
> David, W4SMT
>
> --- On Wed, 4/25/12, David Fleming<[hidden email]> wrote:
>
>> From: David Fleming<[hidden email]>
>> Subject: Re: [Elecraft] MAC KX3 utility
>> To: "Elecraft reflector"<[hidden email]>
>> Cc: [hidden email]
>> Date: Wednesday, April 25, 2012, 12:08 AM
>> Robert,
>>
>> If you are seeing only the bluetooth ports, then the
>> USB/Serial driver is either too old or not installed
>> properly on Snow Leopard. What type of USB/Serial adapter
>> are you using? If it is a Prolific based device, you will
>> need to install the most current driver. This one:
>>
>> http://w4smt.com/KX3/md_PL2303_MacOSX10.6_dmg_v1.4.0.zip
>>
>> If it is a FTDI based device, install this one:
>>
>> http://w4smt.com/KX3/FTDIUSBSerialDriver_v2_2_17.dmg
>>
>> This should solve the problem.
>>
>> David, W4SMT
>>
>>
>> --- On Tue, 4/24/12, Robert Galambos<[hidden email]>
>> wrote:
>>
>>> From: Robert Galambos<[hidden email]>
>>> Subject: [Elecraft] MAC KX3 utility
>>> To: [hidden email]
>>> Date: Tuesday, April 24, 2012, 11:52 PM
>>> tried the mac version of the KX3
>>> utility. it did not work
>>>
>>> and here is the senerio.
>>>
>>> i have fusion. running windows 7 i have no problem
>>> connecting to the
>>> utility. it recognizes the USB driver ( in my case
>> COM3)
>>> update firmware
>>> etc works
>>>
>>> so now after installing the USB driver on the mac side,
>> the
>>> error
>>> message comes back KX3 not responding when i test the
>>> connection.
>>>
>>> in this case i only have two Bluetooth port options
>> aand
>>> niether work.
>>>
>>> running snow leopard
>>>
>>>
>>>
>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Steve Reed

Re: High Sierra in qst

In reply to this post by K4KGG

Larry and all,

I have a High Sierra HS-1800 Pro which has served me well over the years as
a "HOA-Buster". I have it mounted on a pipe in a bucket of cement in my
back yard, with the radials spread out. Works great. Like you, I've done
the maintenance and replaced the springs a couple of times. However -- the
antenna is supposed to work on 6 meters with the whip removed, and I've
never been able to get that working -- the SWR is just out of sight. I
contacted High Sierra by email and phone about that and a couple of other
minor issues and, regrettably, I have to agree with you on the customer
service side of things. The best I was ever able to get out of them was
"it should work", and "you must be doing something wrong". I gave up and
the matter was never resolved.

However, the antenna otherwise continues to work well and still serves its
purposes today.

I generally give most companies the benefit of the doubt so I've never made
a big deal over this. But, in retrospect and after reading your posting,
I've gotta agree.

Steve, AI7AZ
Vail, AZ

On Wed, Apr 25, 2012 at 2:13 PM, Larry Libsch <[hidden email]> wrote:

> Eric, Group -
>
> I own a High Sierra screwdriver antenna purchased in 2001 and
> used portable on the back of my RV all around the US and Canada. The
> antenna has needed several new contact springs, but has provided
> reliable service given regular maintenance. However, my experience with
> Jim and with High Sierra customer service has been consistently poor. No
> customer service by phone, emails unanswered. I have found Jim to be
> arrogant, offensive and unhelpful. This is a strong statement, but it
> accurately reflects my experience. My unit has served me well but I
> would not consider buying another antenna from this company.
>
>
>
> K4KGG, Larry
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>