Hnit for using Windows7 and PSK31

[Kenneth Christiansen]

I could tune in a PSK31 signal using either MixW or Digipan but it would
go away after just a few letters both on the screen and the water fall.
I found the following procedure fixed the problem.

Right click the speakers ICON
Left Click Recording Devices
Left click Communications
Left Click Do Nothing
Left Click Apply
Left Click OK

There are also screens to adjust the gain and select input jacks if
needed under Recording Devices.

Now PSK31 works well again but it was disappointing yesterday when I
tried to show a new ham PSK31 and I could not make it work.

Hope this hint helps others.
73
Ken W0CZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html