How Do I Recover From A Hard Reset?

[Gottlieb, Jonathan]

I am helping a local ham who accidentally did a hard reset on his
K2/100.  He has given me his original manuals which have the various
initial calibration settings recorded, but as he did the hard reset
accidentally, he did not write down the settings you are supposed to
keep before you do a hard reset.  What is the process I need to follow
in order to set his K2/100 back up?  All advice and help is appreciated.

 
Jonathan Gottlieb
WA3WDK







____________________________________________________________________________________________________________

CONFIDENTIALITY NOTICE: The information contained in this e-mail is confidential, may be legally privileged, and is intended only for the use of the party named above. If the reader of this is not the intended recipient, you are advised that any dissemination, distribution, or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately notify us by telephone at 612.335.1500 and destroy this e-mail.
____________________________________________________________________________________________________________

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Jonathan,

The best way I can describe what needs to be done after a hard reset is to
tell him to follow all the Alignment and Test items in the manual that are
associated with a menu setting (including CAL PLL and CAL FIL).  He should
do the same with the instructions from the KPA100 manual, and any of the
manuals for his installed options.

Note that he does not have to do all the adjustments, only the ones
associated with setting a menu parameter.  But he could do all adjustments
if he wanted.

There are two things on my website (http://w3fpr.qrp.radio) that he may find
helpful.  First is an alignment and test document extracted from the K2
manual, and second is the article on K2 Dial Calibration.

He probably will write down the setting for future recovery - something akin
to doing a backup of important computer files.

73,
Don W3FPR

> -----Original Message-----
>
> I am helping a local ham who accidentally did a hard reset on his
> K2/100.  He has given me his original manuals which have the various
> initial calibration settings recorded, but as he did the hard reset
> accidentally, he did not write down the settings you are supposed to
> keep before you do a hard reset.  What is the process I need to follow
> in order to set his K2/100 back up?  All advice and help is appreciated.
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com