Can you now explain how you use the RX Antenna types... IE. When you push and hold the RX ant button...
> Date: Wed, 30 Jun 2010 03:40:52 -0700
> From:
[hidden email]
> To:
[hidden email]
> Subject: Re: [Elecraft] How to work KXV3
>
>
>
> lu1xs wrote:
> >
> > I have a module installed (KXV3) my K3, please I need a help to better
> > understand the work of this module, when using an antenna to receive RX
> > ANT IN (KXV3) rear panel, and to transmit ANT 1, the change is done
> > automatically or I have to do manual with Knob Controls RX ANT to front
> > panel.-
> >
>
> Hola Luis,
>
> To use an external RX antenna, connect it to RX ANT IN on the KX3V and then
> tap RX ANT on the front panel. K3 automatically switches from that antenna
> in receive to either ANT1 or ANT2 in transmit. If you later decide to
> transceive on ANT1 or ANT2, tap RX ANT on the front panel again so "RX ANT"
> on the display disappears.
>
> 73, Bill
>
> --
> View this message in context:
http://elecraft.365791.n2.nabble.com/How-to-work-KXV3-tp5237048p5237493.html> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
