Thanks Bill. The answer is yes to all of your questions.
Don
----- Original Message -----
From: "Bill Coleman N2BC" <
[hidden email]>
To: "Don Clark" <
[hidden email]>
Sent: Saturday, March 04, 2006 9:50 PM
Subject: Re: [Elecraft] I/O Port issue?
> Hi Don, did you turn it on in the K2??? SECondary menu, Port = ON
>
> Make sure the programs are set to 4800 baud, 8 bits, no parity, 1 or 2
> stop bits.
>
> (Something I trip over all the time) Are you sure you have the correct COM
> port number on your PC? Now-a-days the COM port number is configurable,
> check the windows control panel entry.
>
> Good luck!
>
> 73, Bill N2BC
>
> Don Clark wrote:
>> I want to control my K2 via my computer. My I/O port was built when I
>> built the KPA100 last summer. I have built the cable and have double
>> check the connections.
>> Using Hyperterminal, I receive no info from the K2. I also receive
>> nothing from the K2 when using Ham Radio Delux. I use this program with
>> my FT-1000D successfully.
>>
>> I am able to send commands to my K2 and have it react correctly. There
>> isn't too much documentation in the manuals about the I/O port. Does
>> anyone have any ideas on where I should look first? Again, I have double
>> checked the cable.
>>
>> Don - KA6AKH K2 - 1683
>> _______________________________________________
>> Elecraft mailing list
>> Post to:
[hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>
http://mailman.qth.net/mailman/listinfo/elecraft>> Help:
http://mailman.qth.net/subscribers.htm>> Elecraft web page:
http://www.elecraft.com>>
>>
>>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
