It's simple to connect the K3 to the TL-922 via ARB.
Key relay output from K3 to input of ARB. Output from ARB to Key relay
input of TL-922.
RF patch from K3 output to TL-922 RF input.
That's it. You're good to go. No need to run ALC; the SB-220's can take a
lot of abuse and is almost impossible to overdrive with the K3. Just tune
with about 20w to 30w drive to begin, then peak at max smoke. Adjust
exciter drive power to control final output power.
73 de James K2QI
On Tue, Aug 11, 2009 at 2:22 PM, Lars Midtboe <
[hidden email]> wrote:
--
73 de James K2QI
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
--... ...-- -.. . .--- .- -- . ...