Improving Circuit Board Connections

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Improving Circuit Board Connections

Ken Miller K6CTW
All,

I was talking with one of our vendors this past week when he mentioned a
product that their network folks and others used when they had issues
with a circuit board not working as advertised or when it had
intermittent connections.

The product that they use is called Satbilant.

_http://www.amazon.com/D-W-Electrochemical-22S-50mL-Stabilant/dp/B001E50P5A_


Thought this might be of interest to the K3 builders as it could be very
useful especially if the K3 was going to be operating in high vibration
environments or was going to go on a DXpedition.

73 - Ken Miller, K6CTW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Improving Circuit Board Connections

Tom Hammond-2
Thanks Ken,

However the link you provided appears to be busted... however maybe
the following link will give readers some usable info:

    http://www.stabilant.com/techt02h.htm

73,

Tom   N0SS

At 12:17 12/06/2009, Ken Miller, K6CTW wrote:

>All,
>
>I was talking with one of our vendors this past week when he mentioned a
>product that their network folks and others used when they had issues
>with a circuit board not working as advertised or when it had
>intermittent connections.
>
>The product that they use is called Satbilant.
>
>_http://www.amazon.com/D-W-Electrochemical-22S-50mL-Stabilant/dp/B001E50P5A_
>
>
>Thought this might be of interest to the K3 builders as it could be very
>useful especially if the K3 was going to be operating in high vibration
>environments or was going to go on a DXpedition.
>
>73 - Ken Miller, K6CTW
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Improving Circuit Board Connections

MontyS
In reply to this post by Ken Miller K6CTW
I used Deoxit Gold when assembling the K3 18 months ago.  So far so good.
Monty K2DLJ

> I was talking with one of our vendors this past week when he mentioned a
> product that their network folks and others used when they had issues
> with a circuit board not working as advertised or when it had
> intermittent connections.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html