Info: K2 warm up time vs temp vs drift

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Info: K2 warm up time vs temp vs drift

Ken Bessler-2
I had my K2 off to replace a defective headphone jack and
when I powered it back on, I decided to track how far off
freq the rig was and how long it would take to warm up to
spec. I used Spectran and measured WWV's carrier in USB
mode on 9999.400. Here are the results:

Time on    Room Temp    Off freq amount (hz)
1 minute       75.4 f                    +60
30 mins        76.3 f                    +13
60 mins        77.2 f                    + 7
100 mins      78.3 f                    + 2

I did not transmit during this time so there is no heat other
than by the operation and rx components.

--
  Just my 2¢... 73 es gd dx de Ken KGØWX
        Grid EM17ip, Flying Pigs #-1055
 Proud builder & owner of Elecraft K2 #4913



--

Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.8/37 - Release Date: 7/1/2005

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com