Is K3 SWR Available via CAT Commands

[Chuck-NO5W]

Is it possible to read the K3 SWR via CAT commands with the ATU
bypassed?  I saw a similar question for the K2 in the archives but
nothing on the K3.

73/Chuck/NO5W
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

I read the SWR during the Tx Gain calibration procedure with the ATU (if
present) in BYP.  I have set the Tune Power to a specific level (5 or 50
watts in TxG calibration) and then I do the CAT command equivalent of
pushing the TUNE button. SWR appears in the VFO A area, which can be read
with DS;  

Dick, K6KR

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Chuck-NO5W
Sent: Friday, April 03, 2009 8:52 AM
To: [hidden email]
Subject: [Elecraft] Is K3 SWR Available via CAT Commands

Is it possible to read the K3 SWR via CAT commands with the ATU
bypassed?  I saw a similar question for the K2 in the archives but
nothing on the K3.

73/Chuck/NO5W
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[W8ZN]

Check out the SWR plotter in K3_EZ, the author did a pretty nice job with it!!

Terry

----- Original Message -----

From: Dick Dievendorff

To: 'Chuck-NO5W' , [hidden email]

Sent: Fri, 3 Apr 2009 16:45:45 +0000 (UTC)

Subject: Re: [Elecraft] Is K3 SWR Available via CAT Commands



I read the SWR during the Tx Gain calibration procedure with the ATU (if

present) in BYP.  I have set the Tune Power to a specific level (5 or 50

watts in TxG calibration) and then I do the CAT command equivalent of

pushing the TUNE button. SWR appears in the VFO A area, which can be read

with DS;  



Dick, K6KR



-----Original Message-----

From: [hidden email]

[mailto:[hidden email]] On Behalf Of Chuck-NO5W

Sent: Friday, April 03, 2009 8:52 AM

To: [hidden email]

Subject: [Elecraft] Is K3 SWR Available via CAT Commands



Is it possible to read the K3 SWR via CAT commands with the ATU

bypassed?  I saw a similar question for the K2 in the archives but

nothing on the K3.



73/Chuck/NO5W

______________________________________________________________

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:[hidden email]



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html



______________________________________________________________

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:[hidden email]



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html