Is there a way to connect K3 to CIV bus?

[fserota]

Is there a way, or an adapter, available to connect the K3 to the CIV bus. Second choice would be a K3 serial port to USB adapter. Are there any special considerations here?

Thanks for you help,

Fred, K3BHX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

I think some of the microHAM units might do this. My MK2R+ advertises this capability.

Dick, K6KR

On Dec 28, 2010, at 10:40, "Fred Serota" <[hidden email]> wrote:

> Is there a way, or an adapter, available to connect the K3 to the CIV bus. Second choice would be a K3 serial port to USB adapter. Are there any special considerations here?
>
> Thanks for you help,
>
> Fred, K3BHX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Joe Subich, W4TV-4]

 > I think some of the microHAM units might do this. My MK2R+
 > advertises this capability.

It depends on the purpose for connecting the K3 to CI-V bus.  If
the user is trying to control an Icom compatible peripheral from
the K3, many of the microHAM interfaces (including DigiKeyer II,
microKEYER II, MK2R+ and Station Master) provide CI-V compatible
outputs.  Information on those auxiliary or amplifier control
outputs (including configuration data) are available in the User
Manual.

Note the microHAM interface generates an Icom CI-V "transceive"
compatible data stream "TO" the accessory.  There is no "reverse"
path and as such one can not connect an Icom transceiver to the
auxiliary CI-V jack and slave the K3 (or other supported
transceiver) to the Icom transceiver.

73,

    ... Joe Subich, W4TV
        microHAM America, LLC.
        http://www.microHAM-USA.com
        http://groups.yahoo.com/group/microHAM


On 12/28/2010 2:17 PM, Dick Dievendorff wrote:

> I think some of the microHAM units might do this. My MK2R+
> advertisesthis capability.
>
> Dick, K6KR
>
> On Dec 28, 2010, at 10:40, "Fred Serota"<[hidden email]>  wrote:
>
>> Is there a way, or an adapter, available to connect the K3 to the CIV bus. Second choice would be a K3 serial port to USB adapter. Are there any special considerations here?
>>
>> Thanks for you help,
>>
>> Fred, K3BHX
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html