Is your P3 on the right or left?

[Ken Kopp-3]

I have just completed the first combination
K3 / P3 cover (Ken's), and I'd like to know
if you have your P3 on the right or left side
of your K3.  I would expect that because of
the K3 carrying handle most will place the
P3 on the right.

It makes no difference in the measurements
of the cover, but it becomes important if you
were to order one -with- a cutout for the MIC
and / or PHONES jacks.

73! Rose - N7HKW
       [hidden email]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Brett Howard]

In all true honesty I'm probably a bit weird but I find that I really
like having the P3 on the right but then I wonk the back around a bit.
Essentially I pull the right around on a radius until the bottom right
corner of the K3 and the bottom left corner of the P3 get just close but
not touching.  I kinda like this as it makes a nice concave wrap around
button panel.  Kinda like a tri-mirror would be...

~Brett (N7MG)

On Sun, 2010-08-22 at 01:45 +0000, Ken Kopp wrote:

> I have just completed the first combination
> K3 / P3 cover (Ken's), and I'd like to know
> if you have your P3 on the right or left side
> of your K3.  I would expect that because of
> the K3 carrying handle most will place the
> P3 on the right.
>
> It makes no difference in the measurements
> of the cover, but it becomes important if you
> were to order one -with- a cutout for the MIC
> and / or PHONES jacks.
>
> 73! Rose - N7HKW
>        [hidden email]
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[AB3EN]

I placed my P3 above the K3. Works for me.
Dan AB3EN

[Craig Smith]

Mine is also on top of the K3, and I like it in that position for casual
operating.  I built a glass shelf unit that will accommodate 3 tiers of K3
sized units with a little room to spare both horizontally and vertically
plus a smaller space underneath for paddle, RX antenna controller, etc.   On
the shelf above the K3 I have the P3 and LP-100A.  This arrangement works
nicely.

Once contest season rolls around, I may relocate the P3 behind my keyboard
and below the logging monitor.

73  Craig  AC0DS



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html