Issue with K3 EZ and SWR scan running LP Bridge

[Keith Heimbold]

All -

I am a new K3 owner (day 3) who is working to set up the LP Bridge software so I can run multiple control software apps including HRD, K3 EZ, AC Log and eventually when I purchase the LP Panadapter, SDR.

I noticed a bug with the SWR scan in K3 EZ when I have it running through LP Bridge. It works fine when it operates solo but SWR readings in the K3 software go to figures like 90 or 150 to 1 with the LP Bridge operating. On the display of the K3 SWR readings are fine. Has anyone run into this? I am not sure if there are other issues it with the K3 EZ software operating in this mode with LP Bridge because this is the first bug that I have encountered so far.

Any advice or counsel will be very much appreciated.

Regards,

Keith
AG6AZ

Sent from my iPhone please excuse typos
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[John_N1JM]

Some programs have trouble running through a virtual serial port program such as VSPE or LP Bridge. K3 EZ might be one of them. At one point the K3 utility had that problem. I'm not sure if that is still the case now.

73, John N1JM