I have been using the SignaLink external sound card with my K3S for FT8. I am running Windows 10 and controlling the radio and PTT with Ham Radio Deluxe. It worked well that way. However, a couple of days ago there was a thread on using the internal sound card, and I decided to try it.
I have the single USB cable hooked between the radio and the computer. Is that the only connection required? I have the computer and WSJT-X set to USB CODEX both input and output. Decoding and the PTT are working. When I click tune or Enable transmit to send CQ, the rig goes into transmit, and the ALC indicates signal out. However, a second later the transmission ceases. I had already discovered the microphone privacy setting issue and fixed that problem.
Any suggestions on what I might be doing wrong?
Lee, KV5M
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
