Issues after loading 2.34--Gremlins--Need Help!---RESOLVED!

[dhhdeh]

Hi Everyone,

The third time was apparently the charm as after my third load of
2.34/1.89 all is apparently in order once again.

The cause was unknown but I suspect a communication/port problem problem
with the K3 and my Toshiba laptop.

The VCO PL1 and PL2 error also seem to be fixed (but fingers crossed on
this one though).

Many thanks to Lyle, Don, Vic and Ron for the great help and suggestions
via e-mail.

Amazing support on a Sunday night in the middle of the holiday weekend.

I'll be looking for a deep far east DX opening again tomorrow morning
1400Z as was this morning when I worked BX, BT, VR and HS on 20m
barefoot SSB with my wire antenna. This is the most difficult DX path
here in W1 land.  K3 is a real DX-hound. (Forgive my bragging....)

73 de N1LQ-Dave
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Klaus Koppendorfer]

i also have Problems to load firmware
I think after build in  2. receiver
I have to load firmware several times
with loud whistling K3 after reload and switch on
and error 'E000202' on the
Main display and 'ERR DSE' on the VFO B display.

after loading several times I got 2.34

did nothing change to my laptop

73
OE6KYG
KX1 244
K2 1331
K3 115

> -----Ursprüngliche Nachricht-----
> Von: [hidden email] [mailto:elecraft-
> [hidden email]] Im Auftrag von David and Dianne on Comcast
> Gesendet: Montag, 01. September 2008 05:48
> An: [hidden email]
> Betreff: [Elecraft] Issues after loading 2.34--Gremlins--Need Help!---
> RESOLVED!
>
> Hi Everyone,
>
> The third time was apparently the charm as after my third load of
> 2.34/1.89 all is apparently in order once again.
>
> The cause was unknown but I suspect a communication/port problem problem
> with the K3 and my Toshiba laptop.
>
> The VCO PL1 and PL2 error also seem to be fixed (but fingers crossed on
> this one though).
>
> Many thanks to Lyle, Don, Vic and Ron for the great help and suggestions
> via e-mail.
>
> Amazing support on a Sunday night in the middle of the holiday weekend.
>
> I'll be looking for a deep far east DX opening again tomorrow morning
> 1400Z as was this morning when I worked BX, BT, VR and HS on 20m
> barefoot SSB with my wire antenna. This is the most difficult DX path
> here in W1 land.  K3 is a real DX-hound. (Forgive my bragging....)
>
> 73 de N1LQ-Dave
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com