JT-65 w/K3 help for newbee

[Bruce Wade]

Loaded JT-65 HF

Will the K3 decode it or do I have to wire it to the Mic and speaker on
the computer?

How do I set it up?

I am running a Dell 1.4 GHz with 248 MB of RAM and XP pro SP 2


TNX

Bruce, N7ZA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[W7GJ, Lance]

Howdy Bruce,

Unfortunately, the K3 does not decode JT65A signals, so you must use an external
computer program such as your JT65HF to send and decode them. You just connect the
LINE OUT on the computer to the LINE IN on the rear of the K3, and the computer LINE
IN to the LINE OUT on the rear of the K3.

GL and VY 73, Lance

On 9/12/2011 6:54 PM, Bruce Wade wrote:

>
> Loaded JT-65 HF
>
> Will the K3 decode it or do I have to wire it to the Mic and speaker on
> the computer?
>
> How do I set it up?
>
> I am running a Dell 1.4 GHz with 248 MB of RAM and XP pro SP 2
>
>
> TNX
>
> Bruce, N7ZA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

H

--
Lance Collister, W7GJ
(ex WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, E51SIX, 3D2LR, 5W0GJ)
P.O. Box 73
Frenchtown, MT   59834-0073
USA
TEL: [phone]
QTH: DN27ub
URL: http://www.bigskyspaces.com/w7gj
Windows Messenger: [hidden email]
Skype: lanceW7GJ
2m DXCC #11/6m DXCC #815

Interested in 6m EME?  Ask me about subscribing to the Magic Band EME
email group, or just fill in the request box at the bottom of my web
page (above)!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Matt NM6W]

On 9/12/11 12:03 PM, Lance Collister, W7GJ wrote:
> Howdy Bruce,
>
> Unfortunately, the K3 does not decode JT65A signals, so you must use an external
> computer program such as your JT65HF to send and decode them. You just connect the
> LINE OUT on the computer to the LINE IN on the rear of the K3, and the computer LINE
> IN to the LINE OUT on the rear of the K3.
>
> GL and VY 73, Lance
>
Bruce,

Also, make sure once you have it cabled up that you use the DATA mode,
verify that it's using the correct sideband (USB is typical for JT-65A
), and select DATA A as the data mode you're using.  I'm not in front of
my radio but I think you hold "AFX/Enter" key  (its labeled DATA MD in
yellow) and use the "B" VFO knob to change to DATA A. It defaults to
AFSK A, which will not work and might confuse you (it sure confused me
but that's not hard to do).

73,
-matt
nm6w
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html