K#: 2.20 / 1.88

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

K#: 2.20 / 1.88

dhhdeh
Hi Everyone

I just loaded Beta 2.20/1.88.

IMO the AGC is now virtually PERFECT. (I was actually expecting to be
disappointed with it. Absolutely the opposite.)

Running my SLP at 7 and THR at 6.  I may run it at SLP 8 and THR 5. I'm
not sure yet.  The linearity of the new SLP function works very well.

My AF is on high range and running at 9 O'clock position.

The NR audio level seems much improved and balanced between engaged and
not engaged, perhaps even a little too loud with NR engaged.  I like it.

Elecraft, your radio and your support is amazing.

I hope that you are having as much fun in your work as I am in playing
with your results.

My $.02. I realize that others may not feel the same about Beta 2.20.  
You should try experimenting with the AGC SLP and THR settings to see
how they change how various signals sound from the receiver.

73 de N1LQ-Dave
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: K#: 2.20 / 1.88

srife
    Is there an audio gain function for the NR? My audio is
substantially reduced when the NR is engaged. More so if I have an
aggressive setting for the NR?
 

Stan
W5EWA
Houston, TX
K2/100 SN 4216
K3/100 SN 0690



David and Dianne on Comcast wrote:

>
> Running my SLP at 7 and THR at 6.  I may run it at SLP 8 and THR 5.
> I'm not sure yet.  The linearity of the new SLP function works very well.
>
> My AF is on high range and running at 9 O'clock position.
>
> The NR audio level seems much improved and balanced between engaged
> and not engaged, perhaps even a little too loud with NR engaged.  I
> like it.
>
>
>
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: K#: 2.20 / 1.88

Brett Howard
Hate to ask the stupid question but do you have a signal in the passband
when you activate it?  If so are you using it on a CW or SSB signal when
you notice this level reduction?




On Thu, 2008-07-24 at 21:38 -0500, Stan Rife wrote:

> Is there an audio gain function for the NR? My audio is
> substantially reduced when the NR is engaged. More so if I have an
> aggressive setting for the NR?
>  
>
> Stan
> W5EWA
> Houston, TX
> K2/100 SN 4216
> K3/100 SN 0690
>
>
>
> David and Dianne on Comcast wrote:
> >
> > Running my SLP at 7 and THR at 6.  I may run it at SLP 8 and THR 5.
> > I'm not sure yet.  The linearity of the new SLP function works very well.
> >
> > My AF is on high range and running at 9 O'clock position.
> >
> > The NR audio level seems much improved and balanced between engaged
> > and not engaged, perhaps even a little too loud with NR engaged.  I
> > like it.
> >
> >
> >
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: K#: 2.20 / 1.88

N4LQ-2
In CW mode I see 8db of audio gain with NR engaged. In SSB, a reduction (not
measured). It depends on what is being processed.
Steve Ellington
[hidden email]
----- Original Message -----
From: "Brett Howard" <[hidden email]>
To: "Stan Rife" <[hidden email]>
Cc: "Elecraft" <[hidden email]>
Sent: Thursday, July 24, 2008 10:49 PM
Subject: Re: [Elecraft] K#: 2.20 / 1.88


> Hate to ask the stupid question but do you have a signal in the passband
> when you activate it?  If so are you using it on a CW or SSB signal when
> you notice this level reduction?
>
>
>
>
> On Thu, 2008-07-24 at 21:38 -0500, Stan Rife wrote:
>> Is there an audio gain function for the NR? My audio is
>> substantially reduced when the NR is engaged. More so if I have an
>> aggressive setting for the NR?
>>
>>
>> Stan
>> W5EWA
>> Houston, TX
>> K2/100 SN 4216
>> K3/100 SN 0690
>>
>>
>>
>> David and Dianne on Comcast wrote:
>> >
>> > Running my SLP at 7 and THR at 6.  I may run it at SLP 8 and THR 5.
>> > I'm not sure yet.  The linearity of the new SLP function works very
>> > well.
>> >
>> > My AF is on high range and running at 9 O'clock position.
>> >
>> > The NR audio level seems much improved and balanced between engaged
>> > and not engaged, perhaps even a little too loud with NR engaged.  I
>> > like it.
>> >
>> >
>> >
>> _______________________________________________
>> Elecraft mailing list
>> Post to: [hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.138 / Virus Database: 270.5.5/1571 - Release Date: 7/24/2008
> 5:42 PM
>
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: K#: 2.20 / 1.88

srife
    That's ok...it's good to check to see if I am nuts or not. hi hi

    Yes, listening to SSB on 20m this evening and actually there is not
much noise on the band, for a change. Listening to several QSOs and
turning the NR on causes a drop in audio...but then again, it always
has. I haven't tried it on CW.

Stan
W5EWA
Houston, TX
K2/100 SN 4216
K3/100 SN 0690



n4lq wrote:

> In CW mode I see 8db of audio gain with NR engaged. In SSB, a
> reduction (not measured). It depends on what is being processed.
> Steve Ellington
> [hidden email]
> ----- Original Message ----- From: "Brett Howard"
> <[hidden email]>
> To: "Stan Rife" <[hidden email]>
> Cc: "Elecraft" <[hidden email]>
> Sent: Thursday, July 24, 2008 10:49 PM
> Subject: Re: [Elecraft] K#: 2.20 / 1.88
>
>
>> Hate to ask the stupid question but do you have a signal in the passband
>> when you activate it?  If so are you using it on a CW or SSB signal when
>> you notice this level reduction?
>>
>>
>>
>>
>> On Thu, 2008-07-24 at 21:38 -0500, Stan Rife wrote:
>>> Is there an audio gain function for the NR? My audio is
>>> substantially reduced when the NR is engaged. More so if I have an
>>> aggressive setting for the NR?
>>>
>>>
>>> Stan
>>> W5EWA
>>> Houston, TX
>>> K2/100 SN 4216
>>> K3/100 SN 0690
>>>
>>>
>>>
>>> David and Dianne on Comcast wrote:
>>> >
>>> > Running my SLP at 7 and THR at 6.  I may run it at SLP 8 and THR 5.
>>> > I'm not sure yet.  The linearity of the new SLP function works
>>> very > well.
>>> >
>>> > My AF is on high range and running at 9 O'clock position.
>>> >
>>> > The NR audio level seems much improved and balanced between engaged
>>> > and not engaged, perhaps even a little too loud with NR engaged.  I
>>> > like it.
>>> >
>>> >
>>> >
>>> _______________________________________________
>>> Elecraft mailing list
>>> Post to: [hidden email]
>>> You must be a subscriber to post to the list.
>>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>>
>>> Help: http://mailman.qth.net/subscribers.htm
>>> Elecraft web page: http://www.elecraft.com
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: [hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>> No virus found in this incoming message.
>> Checked by AVG - http://www.avg.com
>> Version: 8.0.138 / Virus Database: 270.5.5/1571 - Release Date:
>> 7/24/2008 5:42 PM
>>
>>
>>
>
>
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: K#: 2.20 / 1.88

Brett Howard
Yea ok then.. I found that mine usually resulted in a reduction of audio
but depending on the band and conditions sometimes it was the same and
sometimes it was more.  I think that this difference in amplitude
depending on the conditions and NR settings selected makes matching the
level pretty near impossible.  But thankfully there is an AF knob that
allows me to do so quickly and easily... :)

I'll have the K3 back tomorrow and I'll be upgrading to the latest
beta...  

Not sure what is going on this weekend but hopefully it'll be a good
chance for me to play...

On Thu, 2008-07-24 at 21:58 -0500, Stan Rife wrote:

> That's ok...it's good to check to see if I am nuts or not. hi hi
>
>     Yes, listening to SSB on 20m this evening and actually there is not
> much noise on the band, for a change. Listening to several QSOs and
> turning the NR on causes a drop in audio...but then again, it always
> has. I haven't tried it on CW.
>
> Stan
> W5EWA
> Houston, TX
> K2/100 SN 4216
> K3/100 SN 0690
>
>
>
> n4lq wrote:
> > In CW mode I see 8db of audio gain with NR engaged. In SSB, a
> > reduction (not measured). It depends on what is being processed.
> > Steve Ellington
> > [hidden email]
> > ----- Original Message ----- From: "Brett Howard"
> > <[hidden email]>
> > To: "Stan Rife" <[hidden email]>
> > Cc: "Elecraft" <[hidden email]>
> > Sent: Thursday, July 24, 2008 10:49 PM
> > Subject: Re: [Elecraft] K#: 2.20 / 1.88
> >
> >
> >> Hate to ask the stupid question but do you have a signal in the passband
> >> when you activate it?  If so are you using it on a CW or SSB signal when
> >> you notice this level reduction?
> >>
> >>
> >>
> >>
> >> On Thu, 2008-07-24 at 21:38 -0500, Stan Rife wrote:
> >>> Is there an audio gain function for the NR? My audio is
> >>> substantially reduced when the NR is engaged. More so if I have an
> >>> aggressive setting for the NR?
> >>>
> >>>
> >>> Stan
> >>> W5EWA
> >>> Houston, TX
> >>> K2/100 SN 4216
> >>> K3/100 SN 0690
> >>>
> >>>
> >>>
> >>> David and Dianne on Comcast wrote:
> >>> >
> >>> > Running my SLP at 7 and THR at 6.  I may run it at SLP 8 and THR 5.
> >>> > I'm not sure yet.  The linearity of the new SLP function works
> >>> very > well.
> >>> >
> >>> > My AF is on high range and running at 9 O'clock position.
> >>> >
> >>> > The NR audio level seems much improved and balanced between engaged
> >>> > and not engaged, perhaps even a little too loud with NR engaged.  I
> >>> > like it.
> >>> >
> >>> >
> >>> >
> >>> _______________________________________________
> >>> Elecraft mailing list
> >>> Post to: [hidden email]
> >>> You must be a subscriber to post to the list.
> >>> Subscriber Info (Addr. Change, sub, unsub etc.):
> >>>  http://mailman.qth.net/mailman/listinfo/elecraft
> >>>
> >>> Help: http://mailman.qth.net/subscribers.htm
> >>> Elecraft web page: http://www.elecraft.com
> >>
> >> _______________________________________________
> >> Elecraft mailing list
> >> Post to: [hidden email]
> >> You must be a subscriber to post to the list.
> >> Subscriber Info (Addr. Change, sub, unsub etc.):
> >> http://mailman.qth.net/mailman/listinfo/elecraft
> >>
> >> Help: http://mailman.qth.net/subscribers.htm
> >> Elecraft web page: http://www.elecraft.com
> >>
> >> No virus found in this incoming message.
> >> Checked by AVG - http://www.avg.com
> >> Version: 8.0.138 / Virus Database: 270.5.5/1571 - Release Date:
> >> 7/24/2008 5:42 PM
> >>
> >>
> >>
> >
> >
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com