K 2 setting

[Neil Foster]

Recently I added to my K 2 the Fixed Audio board now available from Dave
W8FGU. It was originally designed by Don Wilhelm W3FPR and it works
perfectly. I have noticed that when I have set up the Bar display to show
ALC so I can monitor ALC (I monitor RF with an outboard meter) that when I
shut down and later come back the setting does not stay at ALC but reverts
to RF. Is there a way to have it stay in ALC display?
Many thanks
Neil   N4FN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Neil,

Sorry,  but that setting is not saved over a power cycle.
It is good to hear the Fixed Audio Output is serving you well.

73,
Don W3FPR

On 1/12/2020 1:31 PM, Neil Foster wrote:
> Recently I added to my K 2 the Fixed Audio board now available from Dave
> W8FGU. It was originally designed by Don Wilhelm W3FPR and it works
> perfectly. I have noticed that when I have set up the Bar display to show
> ALC so I can monitor ALC (I monitor RF with an outboard meter) that when I
> shut down and later come back the setting does not stay at ALC but reverts
> to RF. Is there a way to have it stay in ALC display?
> Many thanks
> Neil   N4FN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Neil Foster]

Ok, thanks.

On Sun, Jan 12, 2020 at 1:55 PM Don Wilhelm <[hidden email]> wrote:

> Neil,
>
> Sorry,  but that setting is not saved over a power cycle.
> It is good to hear the Fixed Audio Output is serving you well.
>
> 73,
> Don W3FPR
>
> On 1/12/2020 1:31 PM, Neil Foster wrote:
> > Recently I added to my K 2 the Fixed Audio board now available from Dave
> > W8FGU. It was originally designed by Don Wilhelm W3FPR and it works
> > perfectly. I have noticed that when I have set up the Bar display to show
> > ALC so I can monitor ALC (I monitor RF with an outboard meter) that when
> I
> > shut down and later come back the setting does not stay at ALC but
> reverts
> > to RF. Is there a way to have it stay in ALC display?
> > Many thanks
> > Neil   N4FN
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]