Thanks Rick for the response.
I was sitting here writing that email and doing some other book work with the rig still on. After finishing the paperwork, I hit the key once more and the power seemed to return. Maybe a thermal shutdown? Or?? I'll keep an eye on it for the next few days to see if there is a reoccurrence.
I appreciate the input.
73,
Art
-----Original Message-----
From: Rick Bates <
[hidden email]>
To: Art KZ5D <
[hidden email]>
Sent: Sat, Feb 25, 2012 12:59 pm
Subject: Re: [Elecraft] K-3 Lost KPA3 power output
Check the circuit breaker on the rear?
Rick
Tiny iPhone keypad, sorry for typos
On Feb 25, 2012, at 7:25 AM, Art KZ5D <
[hidden email]> wrote:
> Hi all,
>
>
> Running my K-3 at 100w into low SWR antenna. Started a transmission and all
fine. Instantly the output went to zero. Tried a reset. Still zero. I checked
the Config menu setting under KPA and it is set to PA nor. Lowered power to 10 w
and the output is fine. Adjust it past 12 w and the output goes to zero.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html