A "swish noise with no audio" sounds exactly like what my factory
installed sub rx sounded like in diversity mode. Turned out the
associated VFO cable was pluggined into the wrong port on the one of the
vertical boards behind the front panel. There are two VFO sources (one for
independent VFO, one for a second drop of the primary VFO). Check the
wiring.
On Wed, 18 Apr 2018, JAY wrote:
> Thanks to all for the suggestions. I have now discovered that I am RX fine
> on the Main. On the SUB all i get is a swish noise no audio.
> Thanks again in advance
>
> 73
> Jay KI4TXP
>
> On Wed, Apr 18, 2018 at 11:40 AM, JAY <
[hidden email]> wrote:
>
>> I do not get any signals when I turn on the sub rx. I get main rx on both
>> sides of headphones. It has to be a setting that I am missing. I do get a
>> steady sound but no audio. Thanks in advance.
>>
>> --
>> 73
>>
>> KI4TXP JAY
>>
>
>
>
> --
> 73
>
> KI4TXP JAY
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
