K-3 turning on ESSB

[Bruce McLaughlin-2]

I have decided to try ESSB with my K-3.  I found the entry TX ESSB in the
config menu and I set it for 3.5.  However, the word off appeared at the
left of those figures and it did not change no matter what bandwidth I set.
I don't know whether that is correct or whether I have managed to put the
radio in ESSB mode.  Any suggestions would be very much appreciated.  The
owner's manual seems to suggest that the word off should change to on after
the bandwidth is adjusted.  I don't know if that is correct, and if so, how
I can do that.  Rotating the VFO A knob changes the bandwidth but does
nothing to change off to on.  Rotating the VFO B knob causes it to go to
another menu entry.  Thanks in advance for the help.

Bruce-W8FU

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dale Parfitt-3]

Page 36: Tap 1 to turn ESSB on.

Dale W4OP

----- Original Message -----
From: "Bruce McLaughlin" <[hidden email]>
To: <[hidden email]>
Sent: Thursday, January 06, 2011 4:47 PM
Subject: [Elecraft] K-3 turning on ESSB

>I have decided to try ESSB with my K-3.  I found the entry TX ESSB in the
> config menu and I set it for 3.5.  However, the word off appeared at the
> left of those figures and it did not change no matter what bandwidth I
> set.
> I don't know whether that is correct or whether I have managed to put the
> radio in ESSB mode.  Any suggestions would be very much appreciated.  The
> owner's manual seems to suggest that the word off should change to on
> after
> the bandwidth is adjusted.  I don't know if that is correct, and if so,
> how
> I can do that.  Rotating the VFO A knob changes the bandwidth but does
> nothing to change off to on.  Rotating the VFO B knob causes it to go to
> another menu entry.  Thanks in advance for the help.
>
> Bruce-W8FU
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.872 / Virus Database: 271.1.1/3363 - Release Date: 01/06/11
02:34:00

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html