K-3 whine when audio gain at zero

[Elecraft mailing list]

Hi,


Recall reading about others with this problem, but cannot locate it using search on this thread. Any help with removing this aggravation would be appreciated.


My issue is intermittent. Had it briefly before, but mysteriously disappeared. Now it's back.


Thanks.


73,


Art KZ5D
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob McGraw - K4TAX]

Sounds as though digital noise is getting into the analog ground. Make
sure all connections  between the radio and power supply are clean and
tight.  Also, check the ground between the radio ground terminal and the
power supply ground terminal.

Has anything been added to the station in terms of equipment?  Also make
sure all PL-259 connectors are more than finger tight.  I use a pair of
4" Channel Lock pliers to snug them when I add or remove something.

73
Bob, K4TAX

On 11/7/2015 11:18 AM, Art via Elecraft wrote:
> Recall reading about others with this problem, but cannot locate it using search on this thread. Any help with removing this aggravation would be appreciated.
>
>
> My issue is intermittent. Had it briefly before, but mysteriously disappeared. Now it's back.


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]