Elecraft

K-Pod Info

Classic

List

Threaded

5 messages Options

Francisco "Siso" Hennessey-HK3W-

K-Pod Info

Will be great to know how to connect K-Pod before purchase it. I have K3S +
KAT500 + KPA500 + P3 + MicrohamII + SP3 x 2 and I don't see where to
connnect it.

Any advice will be aprreciated

Regards,
Siso HK3W
_____________________________________________________________________

*Francisco "Siso" Hennessey - H K 3 W ---*

*ARRL DXCC Card Checker*

*DXCC HR - DXCC CW - DXCC RTTY -DXCC SSB - 8BDXCC -** | * Skype: siso-hk3w |
*Twitter: **http://twitter.com/HK3W <http://twitter.com/HK3W> *|

*Member of: **ARRL (LM) - LoTW -*
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Nr4c

Re: K-Pod Info

If you read the data sheet on the website, it says
"A utility jack beneath the radio’s front panel acts as the K-Pod’s data interface. The unit can be powered from the radio’s rear 12-V accessory output, the pod’s own USB port, or any 8-15 V, 50-mA DC power source.*”

…bill nr4c

> On Jun 9, 2016, at 1:31 PM, Francisco Siso Hennessey HK3W <[hidden email]> wrote:
>
> Will be great to know how to connect K-Pod before purchase it. I have K3S +
> KAT500 + KPA500 + P3 + MicrohamII + SP3 x 2 and I don't see where to
> connnect it.
>
> Any advice will be aprreciated
>
> Regards,
> Siso HK3W
> _____________________________________________________________________
>
> *Francisco "Siso" Hennessey - H K 3 W ---*
>
> *ARRL DXCC Card Checker*
>
> *DXCC HR - DXCC CW - DXCC RTTY -DXCC SSB - 8BDXCC -** | * Skype: siso-hk3w |
> *Twitter: **http://twitter.com/HK3W <http://twitter.com/HK3W> *|
>
> *Member of: **ARRL (LM) - LoTW -*
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

M0XDF

Re: K-Pod Info

I could be mistaken, but I think the utility jack will power the pod too.
73 de David, M0XDF (K3 #174, P3 #108)
It's not enough that we do our best; sometimes we have to do what's
required. - Winston Churchill

> On 9 Jun 2016, at 18:44, Bill Conkling <[hidden email]> wrote:
>
> If you read the data sheet on the website, it says
> "A utility jack beneath the radio’s front panel acts as the K-Pod’s data interface. The unit can be powered from the radio’s rear 12-V accessory output, the pod’s own USB port, or any 8-15 V, 50-mA DC power source.*”
>
> …bill nr4c
>
>
>
>
>
>> On Jun 9, 2016, at 1:31 PM, Francisco Siso Hennessey HK3W <[hidden email]> wrote:
>>
>> Will be great to know how to connect K-Pod before purchase it. I have K3S +
>> KAT500 + KPA500 + P3 + MicrohamII + SP3 x 2 and I don't see where to
>> connnect it.
>>
>> Any advice will be aprreciated
>>
>> Regards,
>> Siso HK3W
>> _____________________________________________________________________
>>
>> *Francisco "Siso" Hennessey - H K 3 W ---*
>>
>> *ARRL DXCC Card Checker*
>>
>> *DXCC HR - DXCC CW - DXCC RTTY -DXCC SSB - 8BDXCC -** | * Skype: siso-hk3w |
>> *Twitter: **http://twitter.com/HK3W <http://twitter.com/HK3W> *|
>>
>> *Member of: **ARRL (LM) - LoTW -*
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Don Wilhelm

Re: K-Pod Info

The utility RJ-45 jack *can* power the K-Pod, but that requires the
addition of a resistor in the K3/K3S. It is an easy mod to install.

73,
Don W3FPR

On 6/9/2016 3:00 PM, David Ferrington, M0XDF wrote:
> I could be mistaken, but I think the utility jack will power the pod too.
> 73 de David, M0XDF (K3 #174, P3 #108)
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Wes Stewart-2

Re: K-Pod Info

In reply to this post by Francisco "Siso" Hennessey-HK3W-

By now you know.

What I want to know is whether they will be shipping without a user manual. It
would be nice to know how they work before buying one. At least that's how I'm
wired.

On 6/9/2016 10:31 AM, Francisco "Siso" Hennessey HK3W wrote:

> Will be great to know how to connect K-Pod before purchase it. I have K3S +
> KAT500 + KPA500 + P3 + MicrohamII + SP3 x 2 and I don't see where to
> connnect it.
>
> Any advice will be aprreciated
>
> Regards,
> Siso HK3W
> _____________________________________________________________________
>