K Pod switch replacement or fix?

[ke9uw]

I’ve been wondering as I contemplate replacing at least two of the push button switches, if there is a more permanent fix.
The schematic is available on the Elecraft website.
What do you think of installing say a 10K pull-up resistor from the 3 vdc buss to each of the switch outputs. I wonder if that would stabilize the inputs. It seems like the issue is no-current switching making the contact noisy after repeated use. 10 K doesn’t seem like much of a current to help, but that and maybe the presence of a load would reduce the noise to the pic processor.

Chuck KE9UW
[hidden email]

Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]