K-pod CTS to match VFO

[Art Suberbielle-2]

Wayne,

In reading your reply I think perhaps you are misunderstanding exactly what
we are hjoping to see in new software for the K-Pod.

We want the K-Pod to use the same CTS as the VFO A. E.G. 200 CTS on VFO A
and 200 CTS on K-Pod. At present, the K-Pod turns at 50% of what is set on
VFO A.

Hopefully this won't require a lot of code to accomplish.

Thanks.

Art KZ5D

Subject: Re: [Elecraft] K-Pod CTS to match VFO-What say you Wayne?
Message-ID: <[hidden email]>
Content-Type: text/plain; charset=us-ascii

Hi Joe (et al),

I just reviewed this with our K-Pod firmware engineer. Going from 200 to
400 counts is more complex than it sounds because of system bandwidth
limitations at the front panel RJ45 port. We still think it's possible, and
we'll both be looking at it when we get a chance.

73,
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Dennis Moore]

It sounds like Wayne understands perfectly. Increasing the CTS count
from the K-Pod adds more data load on the RJ45 port, and there may be a
question as to whether the port can handle that increase.

73, Dennis NJ6G


On 10/8/2018 09:05, Art Suberbielle wrote:

> Wayne,
>
> In reading your reply I think perhaps you are misunderstanding exactly what
> we are hjoping to see in new software for the K-Pod.
>
> We want the K-Pod to use the same CTS as the VFO A. E.G. 200 CTS on VFO A
> and 200 CTS on K-Pod. At present, the K-Pod turns at 50% of what is set on
> VFO A.
>
> Hopefully this won't require a lot of code to accomplish.
>
> Thanks.
>
> Art KZ5D

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]