K1 # 2034 4-Band Receiver Alignment Problem

[George Kimbriel]

I hope someone can help me.

I have been trying for some time to perform the alignment and test, Part 1 (Page 36-39) for the receiver.

The difficulty seems to be U1 and U2.  I have determined the voltages with and without T1 and T2 installed, they are as follows:

With T1 and T2 installed the voltages are:

                U1                U2                    

Pin 1    0.55                    0
Pin 2    0.55                    0
Pin 3    0                        0    
Pin 4    6.08                6.08
Pin 5    6.08                6.08
Pin 6    6.03                6.03
Pin 7    5.38                5.38    
Pin 8    6.08                6.08


With T1 and T2 Removed the voltages are

                U1                U2                    

Pin 1    0.55                    0
Pin 2    0.55                    0
Pin 3    0                        0    
Pin 4    6.08                6.08
Pin 5    6.08                6.08
Pin 6    6.03                6.03
Pin 7    5.38                5.38    
Pin 8    6.08                6.08

I have checked the toriods 3 times.  Verified the PCB traces.  Also, when I touch pin 4 of U2 I received a very strong AM station in the area.

Thanks for any assistance.

George Kimbriel
K5GNI
K2  3448
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com